New Holland TL100A Technical Data

NH TL100A Engine Specifications

Engine Model – NEF CNH
Engine Type – 4 stroke direct injection diesel
Number of Cylinders – 4
Displacement, cu in (L) – 274,0 (4,49)
Engine Bore, in (mm) – 4,09 (104,0)
Engine Stroke, in (mm) – 5,20 (132,0)
Aspiration – Turbocharged
Intercooled – Air cooled
Maximum Engine Power, hp (kW) – 100,1 (74,6)
Rated Engine Speed, rpm – 98,6 (73,5)
Rated Engine Speed, rpm – 2500
Maximum Torque, Nm (ft-lbs) – 370 (274)
Torque Speed, rpm – 1400
Emission Level – Tier 2
Fuel Injection to combustion chamber – Direct injection
Fuel Tank Capacity, gal (L) – 33,6 (127,0)
Electrical System Rating, Volts – 12

New Holland TL100A Power Take-Off

PTO Operational Type – Independent
Clutch – Electro-hydraulic
PTO Speeds, rpm – 540/540E/1000
PTO / Engine Speeds, rpm – 540/2199
PTO / Engine Speeds, rpm – 540E/1715
PTO / Engine Speeds, rpm – 1000/2382

New Holland TL100A Transmission

Transmission Type (Std) – 12F/12R Shuttle Command
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Maximum Speed Forward, mph (kph) – 24,9 (40,0)
Transmission Type (Opt) – 24F/24R Dual Command Powershuttle
Number of Forward Speeds – 24
Number of Reverse Speeds – 24
Maximum Speed Forward, mph (kph) – 24,9 (40,0)

NH TL100A Wheels and Tires

Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 10.00-16
Rear Tire Size (2WD) – 480/70R34
Front Tire Size (4WD) – 380/70R24
Rear Tire Size (4WD) – 480/70R34

Axles and Brakes

Differential Lock – Electro-hydraulic
Final Drive – Standard
Service Brake – Wet disc
Trailer Brakes – Hydraulic

New Holland TL100A Hydraulic System

Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 13,5 (51,1)
Steering Pump Flow (2WD/4WD) , gpm (Lpm) – 7,9 (30,0) / 10,4 (39,4)
Hydraulic Pressure, Bar (psi) – 198 (2872)
Number of Standard Remote Valves (Rear/Mid) – 3/2

3-Point Hitch

3-Point Hitch Category – 2
Draft Sensing or Lift Control – Mechanical draft control
Standard Lift Capacity at lift pin, lb (kg) – 11155 (5059)

New Holland TL100A Dimensions and Weight

Wheelbase (2WD), in (mm) – 92,2 (2340)
Wheelbase (4WD), in (mm) – 91,1 (2310)
Length, in (mm) – 171,7 (4360)
Height, in (mm) – 96,6 (2450)
Overall Width, in (mm) – 79,2 (2010)
Ground Clearance (2WD), in (mm) – 14,8 (370)
Ground Clearance (4WD), in (mm) – 18 (450)
Front Tread (2WD), in (mm) – 55,4 to 85,6 (1400 to 2170)
Front Tread (4WD), in (mm) – 56,1 to 84 (1420 to 2130)
Rear Tread, in (mm) – 60,4 to 84,1 (1530 to 2130)
Turning Radius, in (mm) – 159 (4050)
Steering Angle, deg – 55
Weight (2WD), lb (kg) – 8488 (3850)
Weight (4WD), lb (kg) – 9370 (4250)

Leave a Comment