John Deere 6030 Technical Specifications

John Deere 6030 Engine Specs

Engine Model …………. John Deere
Engine Type …………. 4 Cycle, six-cylinder, turbocharged
intercooled diesel
Number of Cylinders …………. 6
Displacement, cu in (L) …………. 531 (8.701)
Engine Bore, in (mm) …………. 4.75 (121.0)
Engine Stroke, in (mm) …………. 5.00 (127.0)
Aspiration …………. Turbocharged
Rated Engine Power, hp (kW) …………. 194.0 (143.7)
Rated Engine Speed, rpm …………. 2100
Compression …………. 15.4:1
Firing Order …………. 1-5-3-6-2-4
Air Cleaner …………. Dual paper elements with aspirator
Fuel Tank Capacity, gal (L) …………. 68.0 (257.4)
Oil Capacity, qts (L) …………. 20.0 (18.9)
Coolant Capacity, qts (L) …………. 40.0 (37.9)
Electrical System Rating, Volts …………. 12
Charging System …………. Alternator
Alternator Rating, Amps …………. 55/78

Power Take-Off

PTO Operational Type …………. Independent
PTO Horsepower, hp (kW) …………. 175.3 (130.5)
PTO Speed, rpm …………. 1000
PTO/Engine Speed, rpm …………. 1000/2100

John Deere 6030 Transmission

Transmission Type …………. Syncro-Range
Gearbox Type …………. 8F/2R, Partially synchronized
Number of Forward Gears …………. 8
Number of Reverse Gears …………. 2
Clutch Type …………. Dry disc
Oil Capacity, qts (L) …………. 64.2 (60.5)
Maximum Forward Speed, mph (kph) …………. 19.2 (30.9)
Maximum Reverse Speed, mph (kph) …………. 7.6 (12.2)

Wheels and Tires

Drive Wheels …………. 2WD 4×2
Steering Configuration …………. Front steer
Steering System …………. Power Steering
Brakes Type …………. Differential hydraulic wet disc
Front Tire Size …………. 9.5×20
Rear Tire Size …………. 20.8×38
Front Tread Width, in (mm) …………. 64.5-81.5 (1630-2070)
Rear Tread Width, in (mm) …………. 60-120 (1520-3040)

JD 6030 Hydraulics and Hitch

Hydraulic System Type …………. Closed center
Implement Pump Flow, gpm (Lpm) …………. 22.0 (83.3)
Hydraulic Pressure, Bar (psi) …………. 155 (2250)
Hydraulic Capacity, gal (L) …………. 16.0 (60.5)
Number of Standard Remote Valves …………. 1/2
3-Point Hitch Category …………. 3
Upper Link Pin Diameter, in (mm) …………. 31.75 (1.25)
Upper Link Hole Diameter, in (mm) …………. 32.00 (1.26)
Lower Link Pin Diameter, in (mm) …………. 36.58 (1.44)
Lower Link Hole Diameter, in (mm) …………. 37.34 (1.47)

John Deere 6030 Dimensions and Weight

Wheelbase, in (mm) …………. 104 (2640)
Length, in (mm) …………. 173.1 (4380)
Overall Width, in (mm) …………. 96 (2430)
Ground Clearance, in (mm) …………. 16 (400)
Turning Radius, in (mm) …………. 156 (3950)
Operating Weight, lb (kg) …………. 18180 (8250)

Leave a Comment