John Deere E110 Engine Specifications
Engine Model – Briggs and Stratton 33, OHV
Engine Configuration – Vertical Shaft
Engine Fuel – Gasoline
Power HP (gross) – 19.0
Bore 3.70 in. (94.0 mm)
Stroke 3.06 in. (77.8 mm)
Displacement – 540 cc (33 cu. in.)
Spark Plug Gap – 0.76 mm (0.030 in)
Spark Plug Torque – 20 Nm (15 lb·ft)
Cylinders – Single
Oil Filter – Standard
Air Filter – Cartridge
Oil Capacity – 48 fl. oz. (1.4 L)
Carburetor – Float
Lubrication System – Pressure Lubrication, Full Pressure Lubrication
optional
Crankcase, with Oil Filter – 1.4 L (1.5 qt)
Fuel Tank (All Models) – 9 L (2.4 gal)
Length (in) – 18.9
Height (in) – 12.9
Width (in) – 16.2
Weight (lbs) – 77
Starter – Electric Start
Muffler – Optional
JD E110 Transmission
Transmission Type – Hydrostatic
Transaxle Model – Tuff Torq TL-200
Reduction Ratio – 21.53:1
Axle Torque (Rated) – 177.7 Nm (131 lb-ft)
Max. Tire Diameter – 457 mm (18 in)
Brake Capacity – 253 Nm (187 lb-ft) @350 N (79 lb) Brake arm force
Displacement (Pump/Motor) – 7/10 cc/rev
Max. Input Speed – 3,000 rpm
Axle Shaft Size – 19.05 mm (0.75 in)
Weight (dry) – 12.5 kg (27.6 lb)
Brake Type – Wet Disc, Internal
Housing (Case) – Aluminum Die-Cast
Gears – Heat-treated Powder Metal
Differential – Automotive-type Bevel Gears
Speed Control System – Foot Control and Hand Control
Bypass Valve (Roll Release) – Standard
Hydraulic fluid type – Proprietary Tuff Torq Tuff Tech drive fluid
recommended
Travel Speed (Forward) – 0-8,9 km/h (0-5,5 mph)
Travel Speed (Reverse) – 0-5,2 km/h (0-3,2 mph)
John Deere E110 Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
Tire Sizes
Size (Front) – 15×6.00-6
Size (Rear) – 20×8.0-8
Tire Pressure (Front) – 97 kPa (14 psi)
Tire Pressure (Rear) – 69 kPa (10 psi)
JD E110 Dimensions
Height – 108 cm (42.5 in.)
Length (Overall) – 175 cm (68.75 in.)
Width (Mower Deck Chute Down) – 138 cm (54.4 in.)
Wheelbase – 48.9 inches (124 cm)
Weight (Operating) – 193 kg (423 lb)
Attachments
42 Inch Mower Deck
Blades Rotary – 2
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 107 cm (42 in)
42 Inch Side Discharge Mower Deck
Cutting width – Edge mower deck, 42 in. (107 cm)
Construction – Stamped steel deck shell
Mower deck material – Steel, 13 gauge
Wash port – Yes
Drive system – Manual power take-off (PTO)
Mower wheels – Two
Mower wheel adjustment – One bolt
Level adjustment – Easy-level deck
Mower Attach Type – Slide under tractor
Front draft arms – One spring clip
Rear draft arms – Two spring clips
Wheels rotate – Not equipped
Drive system – Single belt
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 2.5-10.2 cm (1-4 in)
Cutting Width – 122 cm (48 in)