Massey Ferguson 7618 Engine Specifications
Engine Make – Agco Power
Engine Model – 6.6 L
Number of Cylinders – 6
Advertised Engine Power, Rated, hp (kW) – 165 (123)
Maximum Engine Power, hp (kW) – 190 (142)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 25 (19)
Fuel Tank capacity, gal (L) – 82 (310)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 8 (30)
Displacement, cu in (L) – 403 (6.6)
Engine Bore, in (mm) – 4.25 (108)
Engine Stroke, in (mm) – 4.73 (120)
Block Design, Replaceable Liners – Replaceable wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbo, air-to-air
aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
w/ DEF
Diesel Oxidation Catalyst (DOC) – DOC standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 175 std; two 120 opt.
MF 7618 Basic Transmission Configuration
Manufacturer’s Description – Dyna-6
Transmission Type – 4 ranges, 6 powershift speeds in each
Number of Forward / Reverse Speeds – 24F / 24R
Maximum Speed Forward, mph (kph) – 25 (40) std; 31 (50) available
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission 1
Manufacturer’s Description – Dyna-VT
Transmission Type – Continuously variable
Number of Forward / Reverse Speeds – Infinite, 2 ranges
MF7618 Tractor PTO Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 130 (97)
Power Take off Speeds, rpm – 540 / 540E /100 / 1000E
PTO operational Type – Independent
Wheels Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange std; Bar optional
Axle Bar Diameter, in (mm) – 3.23 (82) std; 3.74 (95) w/ CVT
Front Axle
Suspended Front Axle Available – Standard on Deluxe and Premium
Brakes
Service Brake Type – Wet Multi-Disc
Massey Ferguson 7618 Tractor Hydraulic System
Hydraulic System Type – Closed Center Load Sensing std; Open center opt.
Main Hydraulic Pump Type – Gear Pump
Implement Pump Flow, gpm (Lpm) – 29 (110)
Optional Pump Flow, gpm (Lpm) – 39 (147)
Number of Standard Remote Valves – 2 std; 3 or 4 opt.
MF 7618 Tractor 3-Point Hitch Features
3-Point Hitch Category – Category 2 / 3
Optional Hitch Category – Category 3
Draft Sensing or Lift Control – Electronic lower link
Draft Link Ends Telescopic – Telescopic std
Standard Lift Capacity at lift pin, lb (kg) – 9,800 (4445)
Optional Lift Capacity at lift pin, lb (kg) – 11,500 (5210)
Drawbar
Drawbar Description – Category 2, Swinging
Wheelbase
Wheelbase, MFD/4WD or Track, in (mm) – 113.1 (2874)
MF7618 Dimensions
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 192.8 (4896)
Height to Top of Cab, in (mm) – 117.4 (2983)
Width w/Tires with standard wheels or tracks, in (mm) – 90 (2277) axle
ends
Weight w/Tires
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 15,060
(6830)
Weight, Total allowable, w/maximum ballast, lb (kg) – 20,393 (9250)
Dyna-6; 25,353 (11500) Dyna-VT
Tire Size
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85 R28, R1W
(14.9R28)
Rear Tire Size or Track Width – 460/85 R38, R1W (18.4R38)