D902 Engine Specifications
Type – Liquid-cooled, 3-cylinder diesel
Model – Kubota D902
Engine gross HP at 3200 rpm HP (kW) – 23.0 (17.1)
PTO horsepower at 3200 rpm HP (kW) – 17.7 (13.2)
Displacement cu.in. (cc) – 54.8 (898)
Fuel tank capacity gal. (l) – 6.6 (25)
Kubota BX23S Drive Train
Transmission – HST, High-Low gear shift ( 2 forward / reverse )
Drive method – 4WD
Brakes – Wet disc
Power Take-off – Live independent PTO (with hydraulic clutch)
Rear PTO – STD (540 rpm)
Mid PTO – STD (2500 rpm)
Kubota BX23S Hydraulics
Pump output gpm (l/min.) – 6.2 (23.5)
3-Point hitch – Optional
Lift capacity 24 behind pin lbs. (kg) – 680 (310)
Steering – Hydraulic power steering
Tire Size
Front Turf/Bar/Industrial – 18×8.5–10 / 18×8.5– 10 / 18×8.5–10
Rear Turf/Bar/Industrial – 26×12–12 / 26×12–12 / 26×12–12
Traveling Speeds At Rated Engine RPM
Forward mph (km/h) – 0-8.4 (0-13.5)
Reverse mph (km/h) – 0-6.5 (0-10.5)
Kubota BX23S Dimensions
Length with 3-point hitch in. (mm) – 99.0(2515) w/Front guard
Width in. (mm) – 45.1 (1145)
Height with ROPS in. (mm) – 86.2 (2190)
Wheelbase in. (mm) – 55.1 (1400)
Ground clearance (front axle) in. (mm) – 8.4 (213)
Front Tread in. (mm) – 36.6 (930)
Rear Tread in. (mm) – 32.2 (820)
Turning radius (w/o brake) feet (m) – 7.5 (2.3)
Tractor weight (w/ROPS) lbs. (kg) – 1570 (712)
BT603 Backhoe Specifications
Bucket cylinder digging force lbf. (N) – 1936 (8610)
Dipperstick cylinder digging force lbf. (N) – 1171 (5209)
Boom swing mechanism One cylinder
Shipping weight (with 12 bucket) lbs. (kg) – 607 (275)
Transport height in. (mm) – 67.7 (1719)
Loading height ft. (mm) – 5 (1533)
Digging depth ft. (mm) – 6.1 (1842)
Swing pivot to rear axle center line in. (mm) – 28.6 (726)
Reach from swing pivot ft. (mm) – 8.7 (2612)
Bucket rotation degrees – 180
Swing arc degrees – 140
Angle of departure degrees – 20.1
LA340 Loader Specifications
Max. lift height (to bucket pivot pin) in. (mm) – 71.0 (1804)
Dumping clearance in. (mm) – 52.1 (1323)
Dumping reach at max. lift height in. (mm) – 25.4 (646)
Maximum dump angle degrees – 45
Reach with bucket on ground in. (mm) – 54.8 (1392)
Bucket rollback angle degrees – 29
Digging depth in. (mm) – 4.9 (125)
Bucket width in. (mm) – 48 (1219)
Lift capacity (500mm fwd, max. height) lbs. (kg) – 509 (231)
Lift capacity (pivot pin, max. height) lbs. (kg) – 739 (335)
Breakout force (500mm fwd) lbf. (N) – 987 (4389)
Raising time / lowering time (w/o load) second – 3.3 / 2.5
Bucket rollback time / dumping time second – 2.3 / 2.7
RCK54 Mower Specifications
Adjustment of cutting height – Dial gauge
Cutting height – 1.0-4.0 in. (25-102 mm) at 1/4 in. (6.4mm)
Cutting width; in. (mm) – 54 (1,372)
Mower Deck Model – RCK48P-18BX / RCK54P-23BX
Deck Type – Side Discharge
Mounting method – Suspended-Linkage
Number of blades – 3
Weight – 165 lbs. (75 kg) / 209 lbs. (95 kg)