1742 Massey Ferguson Engine Specifications
Engine Model – Mitsubishi K38
Number of Cylinders – 3
Displacement, cu in (L) – 101 (1.655)
Engine Bore, in (mm) – 3.39 (86)
Engine Stroke, in (mm) – 3.74 (95)
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
intercooled
Advertised Engine Power, Rated, hp (kW) – 42 (31)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2500
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 14.5 (55)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Fuel System Description – Bosch common rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier Tier 4
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC std
Diesel Particulate Filter (DPF) – DPF std
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 40
MF 1742 Tractor PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) 32.8 (24.5)
Power Take Off Speeds, rpm 540
PTO operational Type – Independent
Massey Ferguson 1742 Basic Transmission
Manufacturer’s Description 12Fx12R Power shuttle
Transmission Type 4 Gears, 3 ranges
Number of Forward / Reverse Speeds 12F / 12R
Creeper Range Available No
Shuttle (Forward-Reverse) Available Yes
Optional Transmission
Manufacturer’s Description Servo-HST
Transmission Type Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds Infinite, 3 ranges
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Axles and Brakes
Final Drive Location and Description – Drop-axle type w/bull-gear final
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Internal wet disc
MF 1742 Hydraulic System
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 11.6 (43.8)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 std; up to 3 total
Massey Ferguson 1742 Hitch and Drawbar
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Draft control optional
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 2,535 (1150)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Extendable
Wheelbase and Tires
Wheelbase, MFD/4WD or Track, in (mm) – 71.1 (1805)
Front Tire Size orTrack Width, MFD/4WD or Track – 8-16, 6 PR, R1
Rear Tire Size or Track Width – 12.4×24, 6 PR, R1
Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 130.7 (3320)
Height to Top of Cab, in (mm) – 91.3 (2320)
Overall Width, with standard wheels or tracks, in (mm) – 64.2 (1630)
Weight, MFD/4WD w/ROPS, lb (kg) – 3,638 (1650)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 4,068 (1845)