Puma 125 Engine Specifications
Engine Make – Case IH FPT
Engine Model – NEF 667TA
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Advertised Engine Power, Rated, hp (kW) – 125 (93)
Maximum Engine Power, hp (kW) – 148 (110)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 25 (19)
Fuel Tank capacity, gal (L) – 75 (284)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std / 200 Opt
Case IH Puma 125 Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 105 (78)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 18 x 6 Full Powershift
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 19 x 6 Hi-Speed Gear
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 19F / 6R
Puma 125 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 107.8 (2739) / 109.7
(2786) Suspended Axle
Front Tire Size orTrack Width, MFD/4WD or Track – 14.9 R30
Rear Tire Size or Track Width – 18.4 R42
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange or bar
Axle Bar Diameter, in (mm) – 3.62 (92)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Case IH Puma 125 Hydraulic System
Hydraulic System Type – Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type – Variable Displacement
Implement Pump Flow, gpm (Lpm) – 26.5 (100)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 Mechanical
3-Point Hitch
3-Point Hitch Category – Category 2 / 3N
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic Draft Control (EDC)
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 7,900 (3584)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 9,200 (4173)
Optional Lift Capacity at lift pin, lb (kg) – np
Drawbar Description – Swinging
Puma 125 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 179.5 (4559)
Height to Top of Cab, in (mm) – 118.3 (3005)
Height to Top of ROPS raised, in (mm) – No open ROPS
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 13,228
(6000)
Weight, Total allowable, w/maximum ballast, lb (kg) – 23,149 (10500)
Case IH L760 Loader
Height (to pin) – 167 inches (424 cm)
Clearance, dumped bucket – 129 inches (327 cm)
Dump reach – 31 inches (78 cm)
Dump angle – 56
Reach at ground – 107 inches (271 cm)
Rollback angle – 43
Breakout force (lift) – 4,999 lbs (2267 kg)
Lift to full height (at 800mm) – 4,300 lbs (1950 kg)