John Deere 6190J Engine Specifications
Engine – John Deere PowerTech PROCONVE MAR-I
Type – Inline Diesel Engine, 2 valves
Aspiration – Turbocharged with Charge Air Cooler
Number of cylinders – 6
Displacement – 6.8 L
Compression ratio – 17:1
Power at rated speed – 140 kW (190 hp)
Engine rated speed – 2100 rpm
Engine maximum speed – 2250 rpm
Torque bulge – 28 %
Maximum torque – 813 Nm (600 lb-ft)
Speed at maximum torque – 1550 rpm
Fuel System Type – Electronic with fuel system malfunction warning light
Fuel Pump – High-Pressure Common Rail (HPCR)
Fuel Transfer Pump – Electric fuel transfer pump
Filtering System – Two-stage with water separator and Water-in-Fuel
Sensor
Electrical System – 12V
Alternator Capacity (with standard lights) – 90A
Alternator Capacity (with premium lights) – 120A
Battery Type – Sealed (unserviceable)
Battery Capacity – 12V-150Ah
Starter Motor – 4kW
Lights – Economic-Halogen
JD 6190J Power Take-Off
PTO Type – Independent
Actuation – Electro-Hydraulic
PTO Power at Engine Rated Speed – 119 kW (159 hp)
PTO Rated Speed – 540/1000 rpm
Engine Speed at PTO Rated Speed – 2100 rpm
Transmission
Model – PowrQuad
Transmission Type – Planetary gears, hydraulic shift
Number of gears – 16 forward and 16 reverse gears
Ground Speed/Reverse – 2.6-32.0/2.7-33.3 km/h
Clutch – Mechanical/hydraulic
Clutch Type – Multidisc oil cooled
Actuation – Auto-adjustable hydraulic
No. of disks – 5
Diameter of disks – 225 mm (8.85 in.)
John Deere 6190J Axles and Brakes
Front Axle – 4×4 Standard
Optional – 4×4 John Deere 3 Meters Front Axle
Front Axle Differential Lock – Automatic
Limited Slip – Yes
Supension – No
Maximum Speed – 30 km/h (18.6 mph)
Rear Axle – Flange / Rack and Pinion
Rear Axle Differential Lock – Hydraulic
Service Brake Type – Disk in oil bath
Actuation – Auto-adjustable, hydraulically actuated
Park Brake Type – Transmission lock
Actuation – Controlled by reverse drive lever
Air Trailer Brake – Optional
Actuation – Compressed air
JD 6190J Hydraulics and Hitch
Type – Closed center, pressure-and-flow compensated (PFC)
Hydraulic Pump – Piston Pump
Pump flow rate – 110 L/min (26.4 gpm)
Maximum pressure – 200 bar (2900 psi)
Standard Hitch – Category 3, ball joint type
Optional Hitch – Category 3, hook type
Maximum Lifting Force – 4800 kgf (10582 lbf)
Lifting capacity at 610 mm (2 ft) of hitch – 4800 kgf (10582 lbf)
Control type – Electronic, with sensors in lower hitch arms
Standard selective control valves – Two basic SCV
Optional selective control valves – Two deluxe SCV and one basic SCV
Optional selective control valve flow rate – 100 L/min (26.4 gal/min)
John Deere 6190J Capacities
Fuel Tank – 300 L (79.26 gal)
Cooling System Non-Emissions Certified Engine – 31 L (8,2 gal)
Cooling System Tier 3-Stage IIIA Engine – 25.5 L (6,7 gal)
Engine Oil (with filter) – 20 L (5,28 gal)
Transmission/hydraulic System – 68 L (17,96 gal)
Dana 750/202 Front Axle Differential Housing – 8.2 L (2.16 gal)
Dana 750/202 Front Axle Final Drive Housing (each) – 1.8 L (0.475 gal)
John Deere 3 Meters Front Axle Front Axle Differential Housing – 22.4 L
(5.91 gal)
John Deere 3 Meters Front Axle Final Drive Housing (each) – 3.78 L (1
gal)
JD 6190J Dimensions and Weights
Front Tires – 16.9R28 R1W 136A8 3M / 16.9R28 R1W 136A8 STD
Rear Tires – 650/75R32 R1W 160A8 RP
Wheel Base (Standard Axle) – 2,69 m (105,8 in)
Wheel Base (John Deere 3 Meters Front Axle) – 2,8 m (110,4 in)
Total Length with Front Weights – 5,24 m (150,2 in)
Maximum Height – 3,87 m (152,2 in)
Width of the Front Axle (flange to flange) Standard Axle – 1,78 m (70
in)
Width of the Front Axle (flange to flange) John Deere 3 Meters Front
Axle – 2,68 m (105,5 in)
Width of the Rack and Pinion Rear Axle (Short Axle) – 2,44 m (96 in)
Width of the Rack and Pinion Rear Axle (Long Axle) – 2,80 m (110,5 in)
Width of the Flanged Rear Axle – 1,66 m (65,4 in)
Maximum Permissible Front Axle Load – 5000 kg (9920 lb)
Maximum Permissible Rear Axle Load – 9000 kg (19841 lb)
Maximum Ballasted Weight – 10 650 kg (23479 lb)
Maximum Permissible Weight – 12300 kg (27116 lb)