Case 5220 Engine Technical Data
Engine Model – Cummins 4TA-390
Engine Type – 4-cylinder, direct injection, turbocharged diesel
Number of Cylinders – Four
Displacement, cu in (L) – 239,3 (3,9)
Engine Bore, in (mm) – 4,02 (102,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 94,0 (70,1)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 354 (261)
Torque Speed, rpm – 1500
Idle Speed, rpm – 850-2355
Compression – 16.5:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 35,7 (135,0)
Oil Capacity, qts (L) – 11,0 (10,4)
Coolant Capacity, qts (L) – 18,6 (17,5)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 65
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 80,0 (59,7)
PTO Speeds, rpm – 540/1000
Case IH 5220 Transmission
Transmission Type – 16F/12R, Synchronized
Number of Forward Speeds – 16
Number of Reverse Speeds – 12
Transmission Type – 16F/12R, Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 12
Maximum Speed (Forward), mph (kph) – 18,4 (29,7)
Maximum Speed (Reverse), mph (kph) – 10,3 (16,6)
Service Brake – Wet disc
Case 5220 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 7.50-16
Rear Tire Size – 18.4-30
Case IH 5220 Hydraulics and Hitch
Hydraulic System Type – Closed center
Implement Pump Flow, gpm (Lpm) – 20,1 (76,2)
Hydraulic Pressure, Bar (psi) – 180 (2600)
Number of Standard Remote Valves – 1/3
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Lower link
Standard Lift Capacity at lift pin, lb (kg) – 7700 (3500)
Case 5220 Dimensions and Weight
Wheelbase, in (mm) – 94,3 (2390)
Length, in (mm) – 161,2 (4090)
Height, in (mm) – 105,2 (2670)
Ground Clearance, in (mm) – 22,1 (560)
Weight (2WD), lb (kg) – 8820 (4000)
Weight (4WD), lb (kg) – 10360 (4700)