John Deere 6170J Engine Specifications
Engine – John Deere PowerTech PROCONVE MAR-I
Type – Inline Diesel Engine, 2 valves
Aspiration – Turbocharged with Charge Air Cooler
Number of cylinders – 6
Displacement – 6.8 L
Compression ratio – 17:1
Power at rated speed – 125 kW (170 hp)
Engine rated speed – 2100 rpm
Engine maximum speed – 2250 rpm
Torque bulge – 28 %
Maximum torque – 728 Nm (537 lb-ft)
Speed at maximum torque – 1550 rpm
Fuel System Type – Electronic with fuel system malfunction warning light
Fuel Pump – High-Pressure Common Rail (HPCR)
Fuel Transfer Pump – Electric fuel transfer pump
Filtering System – Two-stage with water separator and Water-in-Fuel
Sensor
Electrical System – 12 V
Alternator Capacity (with standard lights) – 90 A
Alternator Capacity (with premium lights) – 120 A
Battery Type – Sealed (unserviceable)
Battery Capacity – 12 V – 150 Ah
Starter Motor – 4 kW
Lights – Economic-Halogen
Power Take-Off
PTO Type – Independent
Actuation – Electro-Hydraulic
PTO Power at Engine Rated Speed – 106 kW (142 hp)
PTO Rated Speed – 540/1000 rpm
Engine Speed at PTO Rated Speed – 2100 rpm
JD 6170J Transmission
Model – PowrQuad
Transmission Type – Planetary gears, hydraulic shift
Number of gears – 16 forward and 16 reverse gears
Ground Speed/Reverse – 2.6-32.0/2.7-33.3 km/h
Clutch – Mechanical/hydraulic
Clutch Type – Multidisc oil cooled
Actuation – Auto-adjustable hydraulic
No. of disks – 5
Diameter of disks – 225 mm (8.85 in.)
John Deere 6170J Axles and Brakes
Front Axle – 4×4 Standard
Optional – 4×4 John Deere 3 Meters Front Axle
Front Axle Differential Lock – Automatic
Limited Slip – Yes
Supension – No
Maximum Speed – 30 km/h (18.6 mph)
Rear Axle – Flange / Rack and Pinion
Rear Axle Differential Lock – Hydraulic
Service Brake Type – Disk in oil bath
Actuation – Auto-adjustable, hydraulically actuated
Park Brake Type – Transmission lock
Actuation – Controlled by reverse drive lever
Air Trailer Brake – Optional
Actuation – Compressed air
JD 6170J Hydraulics and Hitch
Type – Closed center, pressure-and-flow compensated (PFC)
Hydraulic Pump – Piston Pump
Pump flow rate – 110 L/min (26.4 gpm)
Maximum pressure – 200 bar (2900 psi)
Standard Hitch – Category 3, ball joint type
Optional Hitch – Category 3, hook type
Maximum Lifting Force – 4800 kgf (10582 lbf)
Lifting capacity at 610 mm (2 ft) of hitch – 4800 kgf (10582 lbf)
Control type – Electronic, with sensors in lower hitch arms
Standard selective control valves – Two basic SCV
Optional selective control valves – Two deluxe SCV and one basic SCV
Optional selective control valve flow rate – 100 L/min (26.4 gal/min)
John Deere 6170J Capacities
Fuel Tank – 300 L (79.26 gal)
Cooling System Non-Emissions Certified Engine – 31 L (8.2 gal)
Cooling System Tier 3-Stage IIIA Engine – 25.5 L (6.7 gal)
Engine Oil (with filter) – 20 L (5.28 gal)
Transmission/hydraulic System – 68 L (17.96 gal)
Dana 750/163 Front Axle Differential Housing – 7.45 L (1.97 gal)
Dana 750/163 Front Axle Final Drive Housing (each) – 1.8 L (0.475 gal)
John Deere 3 Meters Front Axle Front Axle Differential Housing – 22,4 L
(5,91 gal)
John Deere 3 Meters Front Axle Final Drive Housing (each) – 3,78 L (1
gal)
JD 6170J Dimensions and Weights
Front Tires – 16.9-28 R1 10L STD / 18.4-26 R1 10/12L 12B 3M
Rear Tires – 24.5-32 R1 10L FL / 30.5L-32 R1 12L RP
Wheel Base (Standard Axle) – 2688 mm (105.8 in)
Wheel Base (John Deere 3 Meters Front Axle) – 2807 mm (110.4 in)
Total Length with Front Weights – 5240 mm (150.2 in)
Maximum Height – 3866 mm (152.2 in)
Width of the Front Axle (flange to flange) Standard Axle – 1780 mm (70
in)
Width of the Front Axle (flange to flange) John Deere 3 Meters Front
Axle – 2681 mm (105.5 in)
Width of the Rack and Pinion Rear Axle (Short Axle) – 2438 mm (96 in)
Width of the Rack and Pinion Rear Axle (Long Axle) – 2807 mm (110.5 in)
Width of the Flanged Rear Axle – 1662 mm (65.4 in)
Maximum Permissible Front Axle Load – 5000 kg (9920 lb)
Maximum Permissible Rear Axle Load – 9000 kg (19841 lb)
Maximum Ballasted Weight – 9550 kg (21054 lb)
Maximum Permissible Weight – 12300 kg (27116 lb)