JD 5105M Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 105 (78.3)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 30.3 (115) OOS / 40.7 (154) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – John Deere
Engine Model – 4045
Number of Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 70 (OOS) / 90 (Cab)
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 90 (78.3)
PTO Speeds, rpm – 540 / 540E
PTO operational Type (Independent; Live; Continuous) – Independent
John Deere 5105M Transmission
Manufacturer’s Description – 16F / 16R PowrReverser
Transmission Type – Gear
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 23.68 (37.9)
Creeper Range Available – Yes
Shuttle (Forward-Reverse) Available – Yes / Clutch Not Required
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 85.75 (2178)
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 12.4R24 R1
Rear Tire Size or Track Width – 480/80R30 R1W
JD 5105M Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disk
Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 24.7 (93.6)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 Rear; 2 Mid-mount
John Deere 5105M Hitch
3-Point Hitch Category – Category 2 Convertible to 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Lower Link
Draft Link Ends Telescopic – Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,498 (2041)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging
Dimensions and Weights
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Height to Top of Cab, in (mm) – 100
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 7,300 (3311)
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 8,400 (3810)
JD 5105M Attachments
John Deere 553 Loader
Height (to pin) – 123 inches (312 cm)
Clearance, dumped bucket – 95 inches (241 cm)
Dump reach – 40 inches (101 cm)
Dump angle – 43
Reach at ground – 71 inches (180 cm)
Rollback angle – 31
Breakout force (at pin) – 5,537 lbs (2511 kg)
Lift to full height (at pin) – 2,917 lbs (1323 kg)