John Deere 3025E Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 24.7 (18.4)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2400
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 6.2 (23.5)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – Yanmar
Engine Model – 3TNV88F-EPJT1
Number of Cylinders – 3
Displacement, cu in (L) – 100.2 (1.642)
Engine Bore, in (mm) – 3.465 (88)
Engine Stroke, in (mm) – 3.543 (90)
Block Design, Replaceable Liners – Cast-in-block
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – EGR standard
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 55
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 17.4 (13)
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Independent
JD 3025E Transmission
Manufacturer’s Description – Hydrostatic, 2 range
Transmission Type – Hydrostatic, 2-range
Number of Forward / Reverse Speeds – Infinite, 2 ranges
Maximum Speed Forward, mph (kph) – 14.1 (22.7)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Two-pedal HST
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 60 (1524)
Front Tire Size orTrack Width, MFD/4WD or Track – 25×8.50-14, R4
Industrial or 7-14, R1 Ag
Rear Tire Size or Track Width – 15.00-19.5, R4 Industrial or 11.2-24, R1
Ag
John Deere 3025E Axles and Brakes
Final Drive Location and Description – Spur gear
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
JD 3025E Hydraulics and Hitch
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Dual gear
Implement Pump Flow, gpm (Lpm) – 5.3 (20.2)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 optional
3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position control
Draft Link Ends Telescopic – No; quick hitch optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,356 (615)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Drawbar optional
John Deere 3025E Dimensions and Weights
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 111.0 (2819)
Height to Top of ROPS raised, in (mm) – 82.3 (2090)
Overall Width, with standard wheels or tracks, in (mm) – 58.0 (1473)
Weight, MFD/4WD w/ROPS, lb (kg) – 2,222 (1008)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No cab
Weight, Total allowable, w/maximum ballast, lb (kg) – 2,264 (1027)