John Deere 210C Engine
Engine Model – John Deere 4-239D
Type – diesel
Number of Cylinders – 4
Cooled – liquid
Displacement – 239 cu in (0.0039 m)
Bore/Stroke – 4.19×4.33 inches (106 x 110 mm)
Gross Power – 58 hp (43.25 kw)
Net Power – 55 hp (41.01 kw)
Net Torque Rise – 0.2
Compression – 17.8:1
Aspiration – Naturally aspirated
Rated RPM – 2200
Torque – 158 lb-ft (214.2 Nm)
Torque RPM – 1300
Starter volts – 12
Oil capacity – 9 qts (8.5 L)
Coolant capacity – 17 qts (16.1 L)
Fuel Capacity – 23 gal (87.06 L)
Intake valve clearance – 0.014 inches (0.356 mm)
Exhaust valve clearance – 0.018 inches (0.457 mm)
Operating Voltage – 12 V
Charging system – alternator
Alternator Supplied Amperage – 51 amps
JD 210C Transmission
Transmission Type – Manual shift
Gears – 4 forward and reverse
Max Speed – 22.4 MPH (36.04 kph)
Max Speed – Reverse – 22.3 MPH (35.88 kph)
Number of Forward Gears – 4
Number of Reverse Gears – 4
Transmission Fluid Capacity – 1.9 gal (7.19 L)
Mechanical
Chassis – 4×2 2WD / 4×4 MFWD 4WD
Steering – hydrostatic power
Brakes – differential hydraulic wet disc
John Deere 210C Hydraulics
Type – open center
Capacity – 8 gal (30.3 L)
Pump Flow Capacity – 24 gal/min (90.84 L/min)
Pump Type – Gear
Relief Valve Pressure – 2500 PSI
Pressure – 2500 psi (172.4 bar)
Total flow – 24 gpm (90.8 lpm)
Steering flow – 4.3 gpm (16.3 lpm)
John Deere 210C Loader Specifications
Loader Height (to pin) – 128 inches (325 cm)
Clearance, dumped bucket – 103 inches (261 cm)
Dump reach – 29 inches (73 cm)
Dump angle – 45
Rollback angle – 40
Loader Breakout force (bucket) – 6,800 lbs (3084 kg)
Lift to full height (at pin) – 4,700 lbs (2131 kg)
Bucket capacity – 1.0 cu yd (0.8 cu m)
Bucket width – 81 inches (205 cm)
Reach at Max Dump Height – 2.5 ft (0.76 m)
John Deere 210C Backhoe Specifications
Backhoe Digging depth – 168 inches (426 cm)
Digging depth (retracted stick) – 168 inches (426 cm)
Digging depth (extended stick) – 213 inches (541 cm)
2-Foot flat digging depth – 165 inches (419 cm)
2-Foot flat digging depth (retracted stick) – 165 inches (419 cm)
2-Foot flat digging depth (extended stick) – 212 inches (538 cm)
8-Foot flat digging depth – 151 inches (383 cm)
8-Foot flat digging depth (retracted stick) – 151 inches (383 cm)
8-Foot flat digging depth (extended stick) – 201 inches (510 cm)
Reach from pivot – 207 inches (525 cm)
Reach from pivot (retracted stick) – 207 inches (525 cm)
Reach from pivot (extended stick) – 251 inches (637 cm)
Reach From Swivel – 17.3 ft (5.27 m)
Reach From Swivel – Extended – 20.9 ft (6.37 m)
Backhoe Loading height – 125 inches (317 cm)
Loading height (retracted stick) – 128 inches (325 cm)
Loading height (extended stick) – 148 inches (375 cm)
Backhoe Bucket force – 9,600 lbs (4354 kg)
Bucket force (retracted stick) – 9,610 lbs (4359 kg)
Bucket force (extended stick) – 9,600 lbs (4354 kg)
Dipperstick force – 5,200 lbs (2358 kg)
Dipperstick force (retracted stick) – 5,200 lbs (2358 kg)
Dipperstick force (extended stick) – 3,510 lbs (1592 kg)
JD 210C Dimensions
Front Tire Size 2WD – 7.50-16,10 PR-F3;11L-15,8 PR
Front Tire Size 4WD – 12.00-16.5,8 PR-R4
Rear Tires Size 2WD – 14.9-24,6 PR-R4 / 16.9-24,6 PR-R3
Rear Tires Size 4WD – 17.5L-24,8 PR-R4 / 16.9-24,8 PR-R4
Length – 276 inches (701 cm)
Width – 75 inches (190 cm)
Height – 137 inches (347 cm)
Height (ROPS) – 101.5 inches (257 cm)
Height (exhaust) – 99 inches (251 cm)
Ground clearance – 11 inches (27 cm)
Turning Radius – 9.4 ft (2.87 m)
Weight – 10,500 lbs (4762 kg)
Max Weight – 10500 lbs (4762.8 kg)