Case 5250 Engine Technical Data
Engine Model – Cummins 6T-590
Engine Type – 4-stroke, direct injection, turbocharged diesel
Number of Cylinders – 6
Displacement, cu in (L) – 359 (5,88)
Engine Bore, in (mm) – 4,02 (102,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 132,0 (98,4)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 455 (336)
Torque Speed, rpm – 1200
Idle Speed, rpm – 850-2355
Compression – 17.5:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 45,0 (170,0)
Oil Capacity, qts (L) – 15,9 (15,0)
Coolant Capacity, qts (L) – 22,0 (20,8)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 65
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 94,0 (70,1)
PTO Speeds, rpm – 540/1000
Case IH 5250 Transmission
Transmission Type – 16F/12R, Partial power shift
Number of Forward Speeds – 16 (24 with Creeper)
Number of Reverse Speeds – 12 (20 with Creeper)
Maximum Speed (Forward), mph (kph) – 24,9 (40,0)
Maximum Speed (Reverse), mph (kph) – 13,7 (22,0)
Maximum Forward Speed (Creeper), mph (kph) – 1,3 (2,1)
Maximum Reverse Speed (Creeper), mph (kph) – 1,5 (2,5)
Service Brake – Wet disc
Case 5250 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 10.00-16
Rear Tire Size – 18.4-38
Case IH 5250 Hydraulics and Hitch
Hydraulic System Type – Closed center
Implement Pump Flow, gpm (Lpm) – 20,0 (75,7)
Hydraulic Pressure, Bar (psi) – 180 (2600)
Number of Standard Remote Valves – 1
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Lower link
Standard Lift Capacity at lift pin, lb (kg) – 7700 (3500)
Standard Lift Capacity 24-in behind pin, lb (kg) – 7000 (3170)
Case 5250 Dimensions and Weight
Wheelbase, in (mm) – 104 (2640)
Length, in (mm) – 171 (4340)
Height, in (mm) – 107 (2700)
Ground Clearance, in (mm) – 22,1 (560)
Weight, lb (kg) – 16000 (7300)