Case 485 Engine Technical Data
Engine Model – Case D-179
Engine Type – 4-stroke, 3-cylinder diesel
Number of Cylinders – Three
Displacement, cu in (L) – 179 (2,9)
Engine Bore, in (mm) – 3,88 (99,0)
Engine Stroke, in (mm) – 5,06 (129,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 53,0 (39,5)
Rated Engine Speed, rpm – 2180
Maximum Torque, Nm (ft-lbs) – 182 (134,2)
Torque Speed, rpm – 1400
Compression – 15:1
Fuel Tank Capacity, gal (L) – 20,0 (75,7)
Coolant Capacity, qts (L) – 12,0 (11,4)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 45
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 43,0 (32,1)
PTO Speeds, rpm – 540
PTO / Engine Speeds, rpm – 540/1936
Case IH 485 Transmission
Transmission Type (Std) – 8F/4R, Synchromesh
Number of Forward Speeds – 8
Number of Reverse Speeds – 4
Transmission Type (Opt) – 16F/8R, Partial power shift
Number of Forward Speeds – 16
Number of Reverse Speeds – 8
Maximum Forward Speed, mph (kph) – 15,6 (25,1)
Maximum Reverse Speed, mph (kph) – 4,9 (7,8)
Service Brake – Wet disc
Case 485 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 6.00-16
Rear Tire Size – 13.6-28
Case IH 485 Hydraulics and Hitch
Hydraulic System Type – Open Center
Standard Implement Pump Flow, gpm (Lpm) – 15,9 (60,2)
Optional Implement Pump Flow, gpm (Lpm) – 17,0 (64,3)
Hydraulic Capacity, gal (L) – 9,0 (34,1)
Number of Standard Remote Valves – 1 or 2
3-Point Hitch Category – 1/2
Standard Lift Capacity at lift pin, lb (kg) – 2340 (1060)
Case 485 Dimensions and Weight
Wheelbase, in (mm) – 79,6 (2020)
Length, in (mm) – 141,6 (3590)
Height, in (mm) – 93,5 (2370)
Overall Width, in (mm) – 73,2 (1850)
Weight (Shipping), lb (kg) – 5200 (2360)
Weight (Maximum), lb (kg) – 10150 (4600)