NH TS6030 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 118 (88)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 39 (148)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – New Holland FPT
Engine Model – NEF 445TA
Number of Cylinders – 4 (2 valve per cylinder)
Displacement, cu in (L) – 274 (4.5)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air intercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 96 (71.6)
PTO Speeds, rpm – 540 / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
New Holland TS6030 Transmission
Manufacturer’s Description – 8F x 2R Constant Mesh Trans w/ Creeper
Transmission Type – Gear
Number of Forward / Reverse Speeds – 12F / 3R
Creeper Range Available – Yes
Optional Transmission
Manufacturer’s Description – 16F x 4R Dual Command Trans
Transmission Type – Mechanical with 1 Powershift
Number of Forward / Reverse Speeds – 16F / 4R
Manufacturer’s Description – 16F x 4R Dual Command Trans w/ Creeper
Transmission Type – Mechanical with 1 Powershift
Number of Forward / Reverse Speeds – 24F / 6R
NH TS6030 Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 99.2 (2520)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 99.2 (2520)
Front Tire Size, 2WD – 10.00×16
Front Tire Size orTrack Width, MFD/4WD or Track – 14.9×28
Rear Tire Size or Track Width – 18.4 x 38
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disc
New Holland TS6030 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Fixed displacement
Implement Pump Flow, gpm (Lpm) – 13 (49)
Optional Pump Flow, gpm (Lpm) – 9 (34) Auxiliary Pump
Number of Standard Remote Valves – 2 Closed Center w/ Flow Control
3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Mechanical Top Link
Draft Link Ends Telescopic – No
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,600 (1633)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 7,200 (3266)
Drawbar Description – Swinging
NH TS6030 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 148.3 (3768)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 155.8 (3957)
Height to Top of ROPS raised, in (mm) – 117.1 (2974)
Overall Width, with standard wheels or tracks, in (mm) – 83.1 (2112)
Weight, 2WD w/ROPS, lb (kg) – 7,751 (3516)
Weight, MFD/4WD w/ROPS, lb (kg) – 8,413 (3816)