NH T9.435 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 370 (272)
Maximum Engine Power, hp (kW) – 429 (315)
Rated Engine Speed, rpm – 2000
Power Boost, hp (kW) – 59 (43)
Fuel Tank capacity, gal (L) – 230 (871)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 42 (159)
Engine Make – New Holland FPT
Engine Model – Cursor 9
Number of Cylinders – 6
Displacement, cu in (L) – 531 (8.7)
Engine Bore, in (mm) – 4.61 (117)
Engine Stroke, in (mm) – 5.31 (135)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – VGT Turbocharged,
Aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) –
HI-eSCR w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 311 (232)
PTO Speeds, rpm – 1000
PTO operational Type (Independent; Live; Continuous) – Independent
New Holland T9.435 Transmission
Manufacturer’s Description – 16 x 2 Ultra Command Full Powershift
Transmission Type – Full powershift
Number of Forward / Reverse Speeds – 16F / 2R
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Frame Articulated
Front Tire Size, 2WD – No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track – 710/70 R42 Duals
Rear Tire Size or Track Width – 710/70 R42 Duals
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 148 (3759)
NH T9.435 Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 5.0 (127)
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – Closed Center Load Sensing (CCLS)
Main Hydraulic Pump Type – Single std; MegaFlow opt.
Implement Pump Flow, gpm (Lpm) – 40 (151)
Optional Pump Flow, gpm (Lpm) – 55 (208); 108 (408)
Number of Standard Remote Valves – 4 std; up to 8 total
New Holland T9.435 Hitch
3-Point Hitch Category – Category 4N Quick Hitch
Optional Hitch Category – Category 3 Quick-Hitch
Draft Sensing or Lift Control – Three Position, Lift, Hold, Lower
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 20,000 (9072)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Category 4, Swinging
NH T9.435 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 291 (7393)
Height to Top of Cab, in (mm) – 151.3 (3843)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 120 (3048) bar
axles
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 35,848
(16260)
Weight, Total allowable, w/maximum ballast, lb (kg) – 42,000 (19051)