Classification – Row Crop tractor
New Holland T7030 Engine Specifications
Engine Model – New Holland 667TA/EBN
Engine Power, Rated, hp (kW) – 235 (173)
Type – 4 stroke Direct injection
Maximum Engine Power, hp (kW) – 200 (149)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 35 (26)
Fuel Tank, gal (L) – 106.9 (405)
Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged and air
to air intercooler
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel – diesel
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Vistronic
Engine cooled – water cooled
Intercooled – Air cooled
Compression ratio – 16.5:1
Electrical System Rating, Volts – 12
Alternator Rating, Amps – Std 150; Opt 200
Batteries Power – 150Ah
Starter Motor output – 4.20Kw / 5.63Hp
New Holland T-7030 Transmission
Description – 18 x 6 Power Command (25mph)
Transmission Type – Full Powershift with Power Shuttle
Gearbox – Power Command
Reversing gear – Hydraulic
Powertrain – 4 Wheel Drive
Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 24.8 (40.0)
Creeper Range – Yes
Shuttle (Forward-Reverse) – Yes
Optional Transmission
Description – 19 x 6 Power Command (Economy)
Transmission Type – Full Powershift with Power Shuttle
Forward / Reverse Speeds – 19F / 6R
NH T7030 Tractor PTO
PTO Horsepower, hp (kW) – 135 (100.7)
Power Take Off Speeds, rpm – 540 / 1000
PTO Type – Independent
Wheels
Drive Wheels – 4WD
Steering – Front Steer std; SuperSteer opt
Rear Axle
Final Drive – Planetary / Inboard
Axle Output End – Bar
Axle Bar Diameter, in (mm) – 4.125 (104.8)
Suspended Front Axle – Yes, Opt.
Brakes
Brake Type – Differential hydraulic wet disc
New Holland T-7030 Tractor Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement
Standard Pump Flow, gpm (Lpm) – 32 (120)
Optional Pump Flow, gpm (Lpm) – 39.6 (150)
Control type – Electronic draft control
Standard Remote Valves – 3 or 4 Mechanical
Steering system
Steering – Hydrostatic
Steering angle – 55 degree
Turning radius Outside of tire – 6,250mm / 246Inch
Maximum hydraulic flow – 66.5L/min
NH T7030 3-Point Hitch Features
3-Point Hitch Category – Category 2 / 3N
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 12,787,(5800)
Drawbar
Drawbar Description – Swinging
Wheelbase
Wheelbase, 4WD, in (mm) – 113.5 (2884) std; 117.2 (2977) SuperSteer
Tire Size
Front Tire Size Width, 4WD – 16.9R30
Rear Tire Size Width – 20.8R42
Dimensions
Length – 4,816mm / 190Inch
Width – 2,334mm / 92Inch
Heigth – 3,165mm / 125Inch