New Holland T7.175 Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 140 (103)
Maximum Engine Power, hp (kW) – 175 (129)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 35 (26)
Fuel Tank capacity, gal (L) – 71.3 (270)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 13 (48)
Engine Make – New Holland FPT
Engine Model – NEF 6.7 L
Number of Cylinders – 6
Displacement, cu in (L) – 411 (6.7)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) –
HI-eSCR w/ DEF
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 150 Std; 200 opt
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 110 (82)
PTO Speeds, rpm – 540 / 540E / 1000 / 1000E
PTO operational Type (Independent; Live; Continuous) – Independent
NH T7.175 Basic Transmission
Manufacturer’s Description – 18×6 Range Command
Transmission Type – Semi Powershift
Number of Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 25 or 31 (40 or 50)
Creeper Range Available – Optional 28F x 12R
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 19×6 Power Command
Transmission Type – 19×6 Full Powershift
Number of Forward / Reverse Speeds – 19F / 6R
Manufacturer’s Description – Auto Command CVT
Transmission Type – Continuously Variable (CVT)
Number of Forward / Reverse Speeds – Infinite, 2 ranges
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer std; SuperSteer opt
Front Tire Size orTrack Width, MFD/4WD or Track – 380/85 (14.9) R28, R1W
Rear Tire Size or Track Width – 460/85 (18.4) R38, R1W
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 107.6 (2734) std; 113.3
(2880) SuperSteer
New Holland T7.175 Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Flange std; Bar opt
Axle Bar Diameter, in (mm) – 3.62 (92)
Suspended Front Axle Available – Optional
Service Brake Type – Wet disc
Hydraulic System
Hydraulic System Type – Closed Center Load Sensing
Main Hydraulic Pump Type – Variable Displacement Piston Pump
Implement Pump Flow, gpm (Lpm) – 30 (113) PS; 33 (125) CVT
Optional Pump Flow, gpm (Lpm) – 37 (140) CVT only
Number of Standard Remote Valves – 3 std; 4th and 5th opt.
NH T7.175 Hitch
3-Point Hitch Category – Category 2 / 3
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic, lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 8,050 (3651)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 9,250 (4195)
Standard Lift Capacity at lift pin, lb (kg) – 12,185 (5527)
Drawbar Description – Extendable, swinging
New Holland T7.175 Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 211 (5347)
Height to Top of Cab, in (mm) – 118.5 (3010)
Height to Top of ROPS raised, in (mm) – No open ROPS
Overall Width, with standard wheels or tracks, in (mm) – 95.8 (2408)
minimum
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 12,787
(5800) std; 13,448 (6100) susp. fr. axle
Weight, Total allowable, w/maximum ballast, lb (kg) – 24,251 (11000)