Classification – Utility tractor
New Holland T-6050 Engine Specifications
Engine Model – New Holland NEF 667TA
Type – 4 stroke Direct injection
Engine Power, Rated, hp (kW) – 125 (93.8)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank, gal (L) – 67 (254)
Cylinders – 6 (2 valve per cylinder)
Displacement, cu in (L) – 411 (6.7)
Maximum (SAE) – 560.00Nm / 414.40lb-ft
Torque rise – 39 %
Max. torque at – 1400rpm
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged /
air-to-air intercooled
Fuel System Description – Rotary-Distributor Type
Fuel System Control – Mechanical
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
NH T6050 Tractor Transmission
Description – 16F / 16R ElectroShift
Transmission Type – 4 range Powershift
Gearbox – Synchro Command
Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 18.90 (30.30) 2WD / 23.79 (38.14) FWD
Creeper Range – Yes
Shuttle (Forward-Reverse) – Yes
Max first gear – 2.00km/h / 1.24mph
Maximum speed – 40.00km/h / 24.85mph
Creeper – 0.20km/h / 0.12mph
Optional Transmission
Model – Dual Command
Type – 2-speed PowerShift
Gears – with creeper 48×48
New Holland T6050 Tractor PTO
PTO Horsepower, hp (kW) – 105 (78.3)
Power Take Off Speeds, rpm – 540
PTO Type – Independent
Engine at PTO speed – 1969/1546/2120rpm
Front side – Optional
Speed front – 1000rpm
Wheels and Steering
Drive Wheels – 2WD / 4WD
Steering – Front Steer
Steering system – Hydrostatic
Steering angle – 55 degree
Rear Axle
Final Drive – Planetary / Inboard
Axle Output End – Flange / bar Optional
Axle Bar Diameter, in (mm) – 3.6 (92)
Suspended Front Axle – No
Brakes
Brake Type – Wet disc
New Holland T-6050 Hydraulic System
Hydraulic System Type – Load-sensing open centre
Main Hydraulic Pump Type – Fixed displacement
Standard Pump Flow, gpm (Lpm) – 16.6 (63)
Optional Pump Flow, gpm (Lpm) – No option
Control type – Mechanical draft control (MDC)
Standard Remote Valves – 2
3-Point Hitch Features
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Mechanical lower link
Draft Link Ends Adjustable – Yes
NH T6050 3-Point Hitch Lift Capacity
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 7,509 (3406)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 8,813 (3997)
Drawbar
Drawbar Description – Swinging
Wheelbase
Wheelbase, 2WD, in (mm) – 104.4 (2652)
Wheelbase, 4WD, in (mm) – 104.7 (2661)
Tire Size
Front Tire Size, 2WD – 10.00 x 16
Front Tire Size Width, 4WD – 14.9R28
Rear Tire Size Width – 18.4R38
Dimensions and Weight
Length – 4,532mm / 178Inch
Width – 1,913mm / 75Inch
Heigth – 2,770mm / 109Inch
Operating weight – 5,030kg / 11,066Lbs
Total weight – 9,000kg / 19,800Lbs