Classification – Row Crop tractor
New Holland T6.175 Engine Specifications
Engine Make – New Holland FPT
Engine Model – NEF 4.5 L
Number of Cylinders – 4
Advertised Engine Power, Rated, hp (kW) – 145 (107)
Maximum Engine Power, hp (kW) – 175 (129)
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – 30 (22)
Fuel Tank capacity, gal (L) – 52.2 (198) std; 58.6 (222) opt.
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 9.7 (37)
Displacement, cu in (L) – 274 (4.5)
Engine Bore, in (mm) – 4.095 (104)
Engine Stroke, in (mm) – 5.20 (132)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged w/
Air-to-Air Intercooler
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) –
HI-eSCR w/ DEF
Cleanup Catalyst (CUC) – CUC standard
Diesel Oxidation Catalyst (DOC) – DOC standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120 std; 150 or 200 opt
New Holland T6175 Basic Transmission
Manufacturer’s Description – 16×16 Electro Command
Transmission Type – Semi-Powershift
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 25 (40)
Shuttle (Forward-Reverse) Available – Standard
Optional Transmission 1
Manufacturer’s Description – 32×32 Electro Command w/AutoShift & Creeper
Transmission Type – AutoShift and Creeper
Number of Forward / Reverse Speeds – 32F /32R
Optional Transmission 2
Manufacturer’s Description – Auto Command CVT, 25 or 31 mph
Transmission Type – Continuously Variable
Number of Forward / Reverse Speeds – Infinite, 2F / 1R ranges
NH T6.175 Tractor Power Take Off Performance
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 120 (89)
PTO Speeds, rpm – 540 / 1000
PTO operational Type – Independent
Wheels Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer; SuperSteer opt.
Rear Axle Assembly
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange std; Bar opt.
Axle Bar Diameter, in (mm) – 3.625 (92)
Front Axle
Suspended Front Axle Available – Optional
Brakes
Service Brake Type – Wet disc
New Holland T-6175 Tier 4B Tractor Hydraulic System
Hydraulic System Type – Open center std; CCLS opt.
Main Hydraulic Pump Type – Fixed displacement
Implement Pump Flow, gpm (Lpm) – 21.1 (80)
Optional Pump Flow, gpm (Lpm) – 29.8 (113)
Number of Standard Remote Valves – 2 std; 3 or 4 opt
NH T6.175 Tractor 3-Point Hitch Features
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 2 / 3N
Draft Sensing or Lift Control – Electronic, lower link pins
Draft Link Ends Telescopic – Yes
Standard Lift Capacity at lift pin, lb (kg) – 8,338 (3782)
Optional Lift Capacity at lift pin, lb (kg) – 9,213 or 11,649 (4179 or
5254)
Drawbar
Drawbar Description – Category 3, Swinging
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 104 (2642) std; 105.7 (2684) susp.; 109.8
(2788) SuperSteer
Length
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 179 (4547) std; 179.4
(4556) susp.; 183.3 (4655) SuperSteer
New Holland T6175 Vertical Dimensions
Height to Top of Cab, in (mm) – 79.2 (2012) low roof; 83.9 (2130) high
roof
Height to Top of ROPS raised, in (mm) – No open ROPS
Width w/Tires
Overall Width, with standard wheels, in (mm) – 98 (2489) Bar axle ends
Weight w/Tires
Weight, MFD/4WD w/Cab, without ballast, lb (kg) – 12,556 (5695) average
Weight, Total allowable, w/maximum ballast, lb (kg) – 19,841 (9000)
Tire Size
Front Tire Size Width, MFD/4WD – 380/85 (14.9) R28 R1W
Rear Tire Size Width – 460/85 (18.4) R38 R1W