New Holland T4.65 Engine Specifications
Engine Make – New Holland FPT
Engine Model – F5D
Number of Cylinders – 4
Advertised Engine Power, Rated, hp (kW) – 64 (48)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 23.8 (90)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Wastegate turbocharged
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier – Tier 4B / Final
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack std;
horizontal opt.
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
NH T4.65 Transmission
Manufacturer’s Description – 12×12 Power Shuttle
Transmission Type – 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds – 12F x 12R
Maximum Speed Forward, mph (kph) – 19 (30.6)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Standard
New Holland T4.65 Tractor PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 50 (37.3)
Power Take Off Speeds, rpm – 540 std; 540 / 540E opt.
PTO operational Type – Fully independent
Wheels Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle
Suspended Front Axle Available – No
Brakes
Service Brake Type – Wet Disc
New Holland T4.65 Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Tandem Gear
Implement Pump Flow, gpm (Lpm) – 12.5 (47.5)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std; 3rd dealer install
NH T4.65 Tractor 3-Point Hitch
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Top link draft sensing
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,664 (1662)
Standard Lift Capacity at lift pin, lb (kg) – 4,832 (2192)
Drawbar
Drawbar Description – Swinging
Wheelbase
Wheelbase, MFD/4WD or Track, in (mm) – 83.9 (2132)
Dimensions
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 151 (3836)
Height to Top of Cab, in (mm) – 97.8 (2484)
Width w/Tires, with standard wheels or tracks, in (mm) – 75.7 (1922)
Weight (w/Tires)
Weight, MFD/4WD w/Cab, without ballast, lb (kg) – 6,239 (2830)
Weight, Total allowable, w/maximum ballast, lb (kg) – 7,338 (3328)
Tires
Front Tire Size Width, MFD/4WD or Track – 11.2 R24, R1W
Rear Tire Size Width – 16.9 R30, R1W