John Deere 5403 Engine Specifications
Engine Model – John Deere 3029T
Engine Type – Disel, Turbocharged
Engine Horsepower – 55.2 kW kW (74 hp) at 2400 rpm
Max. engine torque – 195 Nm
Cylinders – 3
Bore – 106.5 mm (4.19 in.)
Stroke – 110 mm (4.33 in.)
Displacement – 2.9 L (179 cu. in.)
Compression ratio – 17.8:1
Firing order – 1-2-3
Slow idle Speed – 850 rpm
Fast idle Speed – 2600 rpm
Operating range – 1400-2400 rpm
Injection pump timing – 5.4 ± 1° BTDC (Time Trac)
Type of injection pump – Inline
Fuel tank Capacity – 68 L
Engine Sump Capacity – 8.5 L
Battery – 12V, 88 AH
Alternator – 40 Amp
Starter – 12V, 2.5 kW
JD 5403 Transmission
Transmission Type – Collar Shift
Gears (Forward / Reverse) – 9 / 3
Transmission Type SyncShuttle, partially synchronized
Gears (Forward / Reverse) – 9 / 3
Clutch – Dry disc
Oil Capacity – 40 qts (37,9 L)
Dry Clutch (Syncshuttle Transmission) Capacity – 39 L (10 gal)
John Deere 5403 Power Take-Off
PTO Type – Independent
Rear PTO (Std) – 540 rpm at 2400 engine rpm
PTO Clutch (Disk Diameter) – 11,0 in. (28 cm)
PTO Power – 64 hp (47.7 kW)
Mechanical
Drive Wheels – 4×2 2WD / 4×4 4WD (optional)
Steering – Hydrostatic Power
Brakes – Differential wet disc
Brakes Actuation – Hydraulic
Cab – Foldable two-post ROPS
JD 5403 Hydraulic System
Hydraulic System Type – Open center
Pump Type – Tandem-gear
Steering Pump Displacement – 11.9 cu cm (0.73 cu in.)
Implement Pump Displacement – 19.2 cu cm (1.17 cu in.)
Steering Flow Rate – 25.7 L/min. (6.8 gpm)
Implement Flow Rate – 44.0 L/min. (11.0 gpm)
Implement (Maximum) Pressure – 19 000-19 700 kPa (190-197 bar)
Maximum Total Flow – 18,2 gal./min. (68,8 L/m)
Hydraulic System Capacity – 10 gal (37,9 L)
Hitch Type – Universal Three-Point Hitch Category 2, 1 convertible
Draft Control – Top link sensing
Interchangeable Hitch Balls – Standard
Hitch Lift Capacity At 24-in. (61 cm) Behind Hitch Balls – 3050 lb.
(1383 kg)
John Deere 5403 Dimensions
Front Tire Sizes (Two Wheel Drive) – 7.5×16-6PR
Front Tire Sizes (Four Wheel Drive – 9.5-24
Rear Tire Sizes – 16.9×28-8PR
Wheelbase – 80.7 inches (2040 mm)
Clearance (front axle) – 18 in. (450 mm)
Front Tread – 56.9 to 81.9 in. (1440 to 2080 mm)
Rear Tread – 55.8 to 71.7 in. [1410 to 1820 mm)
Turn Radius – 11.3 ft (3400 mm)
Weight (2WD, shipping) – 4725 lb (2143 kg)
Weight (4WD, shipping) – 5122 lb (2323 kg)
Weight (2WD, operating) – 4950 lb (2245 kg)