NH 8240 Engine Technical Data
Engine Model – Ford Genesis
Engine Type – Six-cylinder 12-valve turbocharged diesel
Engine Power Rated, hp (kw) – 110,0 (80,9)
Number of cylinders – 6
Bore, in (mm) – 4,4 (111,8)
Stroke, in (mm) – 5,0 (127,0)
Displacement, cu.in (L) – 456 (7,48)
Compression Ratio – 17.5:1
Firing order – 1-5-3-6-2-4
Idle speed, rpm – 725-775
Maximum no-load speed, rpm – 2195-2275
Rated speed, rpm – 2100
Tappet clearance (Intake), in (mm) – 0,014-0,018 (0,36-0,46)
Tappet clearance (Exhaust), in (mm) – 0,017-0,021 (0,43-0,53)
Coolant Pump Type – Impeller
Fan diameter, in (mm) – 20,1 (510)
Standard Fuel Tank Capacity, gal (L) – 47,9 (217,6)
Cooling System Capacity, qts (L) – 22,9 (21,5)
Engine Oil (including filter), qts (L) – 22,5 (20,9)
Electrical System, Volts – 12
Alternator Rating, Amps – 100/55
Regulator – Integral with alternator
Starting motor – Positive engagement, solenoid operated
Power Take Off
Standard PTO Type – 2 speed, non-shiftable, independent
Optional PTO – 2 speed, shiftable, independent
Engine speed for 540 PTO speed, rpm – 1900
Engine speed for 1000 PTO speed (Std, Non-shiftable), rpm – 2050
Engine speed for 1000 PTO speed (Opt, Non-shiftable), rpm – 2100
New Holland 8240 Transmission
Transmission Type (SLE) – 16F/16R Standard
Max. Forward Speed, mph (kph) – 18,8 (30,0)
Creeper Gears – Option
Reduction Ratio – 5.08:1
Transmission Oil Capacity, gal (L) – 13,3 (60,6)
Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Wheels – Front Steer
Steering – Hydrostatic
Front Tires – 14,9-28
Rear Tires – 18,4-38
New Holland 8240 Axles and Brakes
Front Wheel Toe-Out (2WD), in (mm) – 0-0,5 (0-13)
Front Wheel Toe-Out (4WD), in (mm) – 0-0,25 (0-6)
Rear Axle Capacity, qts (L) – 64,5 (60,6)
Front Hubs Capacity (FWD), qts (L) – 2,8 (2,6)
Front Axle Capacity (FWD), qts (L) – 8,4 (8,0)
Brakes Type – Wet disc, hydraulically actuated
Disc Diameter (overall), in (mm) – 8,8 (224)
Parking Brake – Transmission type
New Holland 8240 Hydraulic System
Hydraulic System Type (SLE) – Closed Centre Load Sensing
Hydraulic Pump Type – Variable displacement piston pump with gear-driven
charge pump
Minimum Delivery (Main pump), gal/min (L/min) – 16,7 (75,8)
Minimum Delivery (Charge pump), gal/min (L/min) – 20,0 (90,8)
Relief Valve Pressure, psi (bar) – 2800 (193)
Steering Pump Type – Fixed displacement gear pump
Steering flow at rated speed, gal/min (L/min) – 7,7 (34,8)
Maximum Steering Pressure, psi (bar) – 2500 (172)
Auxiliary Services Control Valve – Standard
Remote Control Valves – Up to four optional
3-Point Linkage
Rear Hitch Category – 2
Control (SLE) – Electronic Draft Control
Maximum lift capacity at link ends (with two assist rams), lb (kg) –
14455 (6557)
Maximum lift capacity at 24-in to rear of link ends (with two assist
rams), lb (kg) – 12317 (5587)
NH 8240 Dimensions and Weight
Height to top of cab, in (mm) – 110,1 (2797)
Height to top of rollbar, in (mm) – 113,0 (2869)
Height to top of hood, in (mm) – 70,3 (1786)
Crop clearance under front axle (2WD), in (mm) – 26,4 (670)
Crop clearance under front axle (4WD), in (mm) – 22,3 (566)
Crop clearance under rear axle, in (mm) – 18,4 (468)
Minimum ground clearance (under drawbar), in (mm) – 18,0 (456)
Minimum width (with cab), in (mm) – 83,7 (2126)
Minimum width (less cab) (2WD), in (mm) – 83,2 (2112)
Maximum width (2WD), in (mm) – 103,5 (2630)
Maximum width (4WD), in (mm) – 105,6 (2681)
Overall length (2WD), in (mm) – 169,2 (4297)
Overall length (4WD), in (mm) – 171,7 (4361)
Wheelbase (2WD), in (mm) – 106,3 (2700)
Wheelbase (4WD), in (mm) – 103,3 (2623)
Minimum turning radius (without brakes) (2WD), in (mm) – 170,0 (4318)
Minimum turning radius (without brakes) (4WD), in (mm) – 174,0 (4420)
Weight 2WD (with cab), lb (kg) – 9824 (4456)
Weight 4WD (with cab), lb (kg) – 10882 (4936)
Weight 2WD (less cab), lb (kg) – 8685 (3939)
Weight 4WD (less cab), lb (kg) – 9743 (4419)