NH 8160 Engine Technical Data
Engine Model – Ford TC 456
Engine Type – 4 stroke water cooled diesel
Number of Cylinders – 6
Displacement, cu in (L) – 457 (7,49)
Engine Bore, in (mm) – 4,4 (111,8)
Engine Stroke, in (mm) – 5,0 (127,0)
Aspiration – Natural
Rated Engine Power, hp (kW) – 100 (74.5)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 432 (320)
Torque Speed, rpm – 1400
Compression – 17.5:1
Firing Order – 1-5-3-6-2-4
Fuel Tank Capacity, gal (L) – 58,1 (220)
Oil Capacity, qts (L) – 20,0 (18,9)
Coolant Capacity, qts (L) – 27,0 (25,5)
Electrical System Rating, Volts – 12
Batteries Power, Ah – 100
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 90,0 (67,1)
PTO Speeds, rpm – 540/750/1000
New Holland 8160 Transmission
Standard Transmission – 48F/24R Dual Command
Transmission Type – 2 Speed powershift
Number of Forward Speeds – 48
Number of Reverse Speeds – 24
Maximum Speed Forward, mph (kph) – 24,9 (40,0)
Optional Transmission – 31F/12R Range Command
Transmission Type – 2 Speed powershift
Number of Forward Speeds – 31
Number of Reverse Speeds – 12
Maximum Speed Forward, mph (kph) – 24,9 (40,0)
Service Brake – Differential hydraulic wet disc
Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic
Front Tire Size – 14.9 R28
Rear Tire Size – 18.4 R38
NH 8160 Hydraulics and Hitch
Hydraulic System Type – Closed Center
Implement Pump Flow, gpm (Lpm) – 24,7 (93,5)
Steering Pressure, Bar (psi) – 170 (2465)
Hydraulic Pressure, Bar (psi) – 190 (2755)
3-Point Hitch Category – 2
Standard Lift Capacity at lift pin, lb (kg) – 14806 (6730)
New Holland 8160 Dimensions and Weight
Wheelbase, in (mm) – 107,1 (2720)
Length, in (mm) – 182 (4620)
Height, in (mm) – 111 (2830)
Overall Width, in (mm) – 84 (2130)
Turning Radius, in (mm) – 181 (4610)
Shipping Weight, lb (kg) – 11550 (5250)
Operating Weight, lb (kg) – 12650 (5750)