MF 7499 Engine Specifications
Engine Model – Agco Sisu Power 74 CTA
Engine Power, Rated, hp (kW) – 220 (164)
Maximum Engine Power, hp (kW) – 240 (179)
Engine Speed, rpm – 2200
Power Boost, hp (kW) – 20 (15)
Fuel Tank, gal (L) – 94 (355)
Cylinders – 6
Displacement, cu in (L) – 450 (7.365)
Engine Bore, in (mm) – 4.25 (108)
Engine Stroke, in (mm) – 5.28 (134)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Turbo air-to-air
aftercooled
Fuel System Type – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Exhaust Gas Recirculation – Internal EGR
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 175
Massey Ferguson 7499 Transmission
Description – Dyna-VT (ML160.1)
Transmission Type – Continuously Variable (CVT)
Forward / Reverse Speeds – Infinite, 2 ranges
Maximum Speed Forward, mph (kph) – 25 (40)
Creeper Range – Yes
Shuttle (Forward-Reverse) – Yes
Description – Dyna-VT, 31 mph (50kph)
Transmission Type – Continuously Variable Trans.
Forward / Reverse Speeds – Infinite, 2 ranges
MF 7499 Power Take-Off
PTO Horsepower, hp (kW) – 180 (134)
PTO Speeds, rpm – 540 / 540E / 1000
PTO Type – Live shaft drive
Wheels and Tires
Drive Wheels – 4WD
Steering – Front Steer
Wheelbase 4WD, in (mm) – 118.6 (3012)
Front Tire Size Width, 4WD – 420/90/R30
Rear Tire Size Width – 480/80R46
Massey Ferguson 7499 Axles and Brakes
Final Drive – Planetary / Inboard
Rear Axle Output End – Bar
Rear Axle Bar Diameter, in (mm) – 3.74 (95)
Suspended Front Axle Available – Yes
Brake Type – Wet Disc
Hydraulic System
Hydraulic System Type – Closed Center
Standard Pump Flow, gpm (Lpm) – 29 (110)
Optional Pump Flow, gpm (Lpm) – 39 (150)
Standard Remote Valves – 3
MF 7499 Hitch
3-Point Hitch – Category 2/3N
Draft Sensing or Lift Control – Electronic Lower Link Pins
Draft Link Ends Adjustable – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 16,140 (7320)
Standard Lift Capacity at lift pin, lb (kg) – 20,503 (9300)
Drawbar Description – Narrow swing
Dimensions and Weight
Weight (shipping) – 16375 lbs (7430 kg)
Weight (operating) – 17687 lbs (8025 kg)
Wheelbase – 119 inches (3000 mm)
Length – 211 inches (5350 mm)
Short axle Width – 97.3 inches (2460 mm)
Long axle Width – 118.2 inches (2990 mm)
Height (cab) – 121 inches (3040 mm)
Clearance (drawbar) – 16 inches (400 mm)
Front tread – 61 to 88 inches (1520 to 2230 mm)
4WD turn radius – 16.7 feet (5.2 m)