Engine Specifications
Engine – SISU 44 DTA
No. of cylinders – 4
Bore, mm – 108
Stroke, mm – 120
Cubic capacity, L – 4.4
Compression ratio – 17.25/1
Compression pressure (kPa) – 2000/3500
Permissible compression deviation between cylinders (kPa) – 350
Output at 2200 rpm (kw) – 116 (86.5)
Maximum torque (Nm/lbf.ft) – 540
At speed (rpm) – 1400
Idle speed – 950
Nominal speed – 2200
Maximum speed at no load – 2385 +/-30
Injection pump type – Lucas DP210
Rotation – Clockwise
Static timing angle (degrees) – 4
Engine position – TDC
Engine check angle (degrees) – pin
Pump check angle (degrees) – pin
Firing order – 1, 2, 4, 3
Injectors – Bosch
New and servicing setting (bar) – 278
Aspiration system – Turbo, Wastegate, Intercooler air/air
Type – Garrett GT35
Valve spring – single
Valve seat insert (inlet/exhaust) – yes
Valve angle, degrees – 0.46/0.31
Inlet/exhaust valve clearance (mm) – 0.35/0.35
Oil cooler – yes
No. of thermostats – 1
Opening temperature (start/full) – 79C/83C
Piston cooling nozzle – yes
Oil filter – one
Fuel filter – one (+1 prefilter)
MF 5475 Transmission and Clutch
Transmission model – Dyna-4
Type – Powershuttle with 4-Speed Powershift
Power Shuttle – Left Side of Steering Wheel
Speeds – 16 Forward, 16 Reverse
Gears – 4 Powershift
Ranges – 4 Synchromesh and Multi-Disk Wet Clutch, Electronic Controlled
Hydraulic Shuttle
Creeper – Optional, 4:1 Reduction / Optional, 9:1 Reduction
Clutch – Dyna-4 Transmission Tractors Multi-Plate Clutch Pack, Oil
Cooled
Clutch Pack Diameter in (mm) – 6.79 (172.5)
Number of Discs – 5
Control – Foot Pedal and Modulating Valve
Actuation – Hydraulic
Free Play Adjustment – Self Adjusting
Type – Inching Pedal, Electronic Transmission Control
Massey Ferguson 5475 Power Take Off (PTO)
Type – Independent
Speeds (rpm) – 540/1000
Optional Speeds – Economy
Control – Electro-Hydraulic
Clutch – Wet, Multi-Disc
Clutch Disc Diameter in (mm) – 5.31 (135)
Shaft 540 RPM – 6 Spline, 1.375 in. (35)
Shaft 1000 RPM – 21 Spline, 1.375 in. (35)
Engine/PTO Speed Ratio 540 RPM – 1990
Engine/PTO Speed Ratio 1000 RPM – 2090
MF 5475 Rear Axle
Rear Axle Type – Flanged Axle
Differential and Final Drive Type 1 Primary Reduction – Spiral Hypoid
Pinion and Ring Gear on Differential
Differential and Final Drive Type 1 – Secondary Reduction Inboard
Planetaries
Differential Lock Type – Sliding Collar, Engage On the Go
Final Drive – Inboard Planetary
Engagment – Electro-Hydraulic
Rear Brakes – Inboard Wet Disc
Actuation Brakes – Hydraulic
Parking Brake – Hand Operated Lever, Multi-Disc, on Pinion
Axle Length – 71 (1800)
Tread Settings Min/Max, in (mm) – 60.2 (1530)/84.4 (2144)
Maximum Permissible Rear Tire Rolling Circumference – 207(5258)
Maximum Permissible Static Axle Load Limit lb (kg) – 11,905 (5400)
Massey Ferguson 5475 Front Axle
Front Axle (2WD) – Telescopic, Box-In-Box Design
Steering angle – 55 degrees
Tread Settings Adjustable Increments in (mm) – 3.94 (100)
Wheel (10.00×16 Tire) Turned In in (mm) – 64.1 (1629)/79.9 (2029)
Wheel (10.00×16 Tire) Turned Out in (mm) – 67.2 (1707)/83 (2107)
Maximum Permissible Axle Static Load Limit lb (kg) – 6614 (3000)
Front Axle (4WD) Type – Center Pivot, Mechanical Drive, Dana 735
Steering Angle – 55 degrees
Drive – Centerline Splined Shaft
Drive Ratio – 1.363 below 18.4R34 / 1.335 above 18.4R34
Method of Engagement – Electro-Hydraulic, Wet, Multi-Disc Clutch
Differential Lock – Electro-Hydraulic, Simultaneous with Rear Axle
Tread Settings in (mm) – 61.7 (1567)/80.8 (2053)
Maximum Permissible Tire Size – 14.9 R28
Maximum Permissible Axle Static Load Limit lb (kg) – 6614 (3000)
MF 5475 Hydraulic System
Basic Type – Open Center
Drive – PTO Shaft
Flow remotes gpm (lpm) (2200 erpm) – 15.0 (57)
Pressure psi (bar) – 2700 (186)
Remote Valves Standard (optional) – 2 (3, 4)
Optional Type – Combined Flow System
Drive – PTO Shaft
Flow Remotes gpm (lpm) (2200 erpm) – 26.0 (100)
Pressure psi (bar) – 3050 (210)
Remote Valves Standard (optional) – 2 (3, 4)
Filters – 2
Type – External Suction Strainer and Canister Filter
Remote Auxiliary Hydraulic Valves Number – 2 Standard, 3 / 4 Optional
Three Point Hitch
Hitch Category – 2 / 3N
Hitch Lower Links – Extendable
Number of Lift Cylinders – 2, External
Controls – Height/Depth, Raise/Lower, Transport Lock /
Position/Draft/Intermix, Maximum Height of Raise, / Rate of Drop, Active
Transport
External – Raise and Lower Buttons on Both Rear Fenders
Draft Sensing – Lower Link
Lift Capacity 24 in lb (kg) – 9189 (4168)
Type of Stabilizers – Telescopic
Drawbar Type – Narrow Swing w/Clevis
Maximum Vertical Static Load lbs (kg) – 4420 (2000)
Massey Ferguson 5475 Dimensions
Front Tires – 14.9R24
Rear Tires – 18.4R34
Wheelbase, in (mm) – 109.5 (2780)
Length w/ Front Weights, in (mm) – 167 (4135)
Width at Fenders, in (mm) – 100.4 (2550)
Height to Top of Cab, in (mm) – 108.5 (2755)
Ground Clearance, in (mm) – 15 (390)
2WD Base Weight, lbs (kg) – 9910 (4495)
4WD Base Weight, lbs (kg) – 10527 (4775)