MF 3080 Engine Specifications
Engine Model – Perkins A6.354
Number of cylinders – 6
Aspiration – Natural
Bore, mm – 98,47
Stroke, mm – 127,0
Cubic capacity, cm3 – 5800
Maximum engine power, kW – 73,5
Maximum torque, Nm – 374
Engine speed at maximum torque, rpm – 1200
Idling speed, rpm – 850
Maximum rated speed, rpm – 2200
Torque at rated speed, Nm – 325
Maximum no load speed, rpm – 2310
Lubrication – Gear pump
Valves clearances, Intake/exhaust, mm – 0,20/0,45
Lift pump – AC DELCO
Fuel filter with sediment bowl – СAV
Number of elements – Two
Fuel injection pump – rotary with mechanical governor
Injection timing, degrees – 23
Cold weather starting – Thermostart or ether, according to market
Air cleaner – Two-stage, dry element, with centrifugal prefilter and
blockage indicator
Electrical system voltage – 12 volt, negative earth
Batteries – Two
Cooling system – Pressurized system with centrifugal pump
Centrifugal water pump – belt driven
Fan – belt driven
Belt deflection, mm – 10,0
Fuel tank, liters – 173,0
Cooling system, liters – 25,0
Engine oil, liters – 16,5
Massey Ferguson 3080 Transmission
Basic Transmission – 32 Forward and 32 Reverse
Transmission Type – Speedshift
Forward / Reverse Speeds – 32F / 32R
Optional Transmission – 32 Forward and 32 Reverse
Transmission Type – Dynashift
Reverse Shuttle – Standard, mechanical
Creeper Gearbox – Opt.
Forward / Reverse Speeds With Creeper – 48F / 48R
Clutch – Dry single disc
Clutch Type – Diaphragm push-type
Disc Diameter – 330 mm (13,0 in)
Clutch adjustment – Automatic
Reduction unit – Epicyclic, in the rear axle housings
Reduction ratios – 5,077 to 1
MF 3080 Power Take Off
Rear PTO Type – Independent, proportional to the engine speed
Rear PTO Power, kW – 68
Rear PTO Ratio (540 rpm at 1980 engine rpm) – 3,668:1
PTO Ratio (1000 rpm at 2000 engine rpm) – 2:1
Rear Speed Changing – Either by changing shafts, or by lever selection
Rear PTO Shaft – 540/1000 rpm – 35 mm (1.38 in) diameter, 6/21 splines
Rear PTO Control – Lever in the cab
Front PTO – Optional
Front PTO Power, kW – 69
Front PTO Control – Hydraulic, electrically actuated by push button in
the cab
Front PTO Ratio (1000 rpm at 2040 engine rpm) – 2.04:1
Ground speed PTO – Optional
Ground Speed PTO Control – From the normal PTO operating lever
Massey Ferguson 3080 Hydraulics
Hydraulic System – Two stage gear pump, driven directly by the engine
Hydraulic Pump Flow, gal/min (l/min) – 13.2 (50.0)
Maximum Hydraulic Pressure – 185.0 bar
Steering Pump Flow, gal/min – 7.6 (29.0)
Maximum Steering Pressure – 17.0 bar
Suction circuit filtration – One external 150 micron throwaway, canister
type filter
Low flow circuit filtration – One external 15 micron high pressure
filter
3-Point Hitch
Hitch type – 3-point, with fixed, telescopic or quick attach hook ball
ends
Hitch Category – 2
Rams – Twin externally mounted
Ram diameter – 66 mm (2.60 in)
Position of lift rod on lower links, mm – 550/650
Length of lift rods, mm – 595-827
Lower links horizontal/full raised at 550 mm, kg (lb) – 4350-4276
(9600-9437) / 5194-4308 (11463-9507)
Lower links horizontal/full raised at 650 mm, kg (lb) – 5740-4788
(12668-10567) / 5689-4703 (12555-10379)
MF 3080 Front Axle and Steering
FWD Clutch Mechanism – Hydraulic, electrically actuated by push button
in the cab
Differential Lock – Front and rear differential lock-hydraulic with
electrical control
Front Axle assembly, liters – 6,5
Front Final Reduction Units (each), liters – 1,8
Steering – Hydrostatic
Steering Column Type – Fixed or tiltabte telescopic
Steering ram diameter (2WD/4WD), mm – 68/63
Steering rod diameter (2WD/4WD), mm – 45/32
Total stroke (2WD), mm – 236
Ram stroke (4WD), mm – 2×119
Volumetric Displacement (2WD/4WD), cc – 482/550
Steering pressure at steering valve, bar – 166
Steering pressure at return port, bar – 16
Steering valve/displacement – Danfoss/125 cc
Rear Axle and Brakes
Differential Lock – Positive clutch
Differential Lock Control – Hydraulic, with electrical control
Rear Axle Capacity, l – 60,0
Main Brake Type – Oil-immersed single disc per wheel
Brake Disc Outer Diameter, cm – 35,5
Brake Disc Inner Diameter, cm – 29,0
Operation – Hydraulic, from two master cylinders, automatic adjustment
Handbrake – Operates on the rear axle bevel drive pinion
Massey Ferguson 3080 Dimensions and Weights
Standard ront Tires – 12.4-28 / 15.5-38
Standard Rear Tires – 13.6-28 / 16.9-38
Wheelbase (2WD), mm (in) – 2696 (106.1)
Wheelbase (4WD), mm (in) – 2699 (106.25)
Overall length with drawbar (2WD), mm (in) – 4320 (170.0)
Overall length with drawbar (4WD), mm (in) – 4472 (176.0)
Height (cab tractor), mm (in) 2724 – (107.2)
Overall width, mm (in) – 2570 (101.2)
Ground clearance (under drawbar frame), mm (in) – 385 (15.2)
Height to steering wheel (platform models), mm (in) – 2068 (81.4)
Steering angle (2WD), Inner/Outer, deg – 56/43
Steering angle (4WD), Inner/Outer, deg – 50/38.5
Turning Radius (2WD), without brake/with brake, mm (in) – 4320/3800
(171.4/159.3)
Turning Radius (4WD), without brake/with brake, mm (in) – 4700/4300
(186.5/171.2)
Operating Weight (2WD), kg (lb) – 4185 (9226)
Operating Weight (4WD), kg (lb) – 4420 (9744)
Massey Ferguson 3080 Attachments
MF 856 Loader Specifications
Loader model – MF 856
Height (to pin) – 151 in (3830 mm)
Clearance, dumped bucket – 120 in (3040 mm)
Dump reach – 40 in (1010 mm)
Dump angle – 43
Reach at ground – 97 in (2460 mm)
Rollback at ground – 21
Breakout force (at pin) – 5300 lb (2404 kg)
Lift to full height (at pin) – 4100 lb (1859 kg)
Bucket width – 96 in (2430 mm)
Raise time to height – 8,5 sec.
Bucket dump time – 7,5 sec.
Lowering time – 6,5 sec.
Rollback time – 5 sec.