Kubota V3307 Engine Specifications
Engine Model – Kubota V3307-CR-TE4
Number of Cylinders – 4
Displacement, cu in (L) – 203 (3.331)
Engine Bore, in (mm) – 3.70 (94)
Engine Stroke, in (mm) – 4.72 (120)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – Common Rail System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – EGR Valve
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 60
Advertised Engine Power, Rated, hp (kW) – 63.5 (47.4)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2400
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 18.5 (70) on ROPS; 23.8 (90) on Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Power Take-off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 56 (41.7)
PTO Speeds, rpm – 540 / 540E
PTO operational Type (Independent; Live; Continuous) – Live-Independent
Kubota M6060 Basic Transmission
Manufacturer’s Description – F8/R8 Synchronized
Transmission Type – High-Low, 4 speeds each
Number of Forward / Reverse Speeds – 8F / 8R
Maximum Speed Forward, mph (kph) – 18 (29)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Hydraulic Shuttle std
Optional Transmission
Manufacturer’s Description – F8/R8 w/ Creep Range
Transmission Type – High, Low, Creep ranges, 4 speeds each
Number of Forward / Reverse Speeds – 12F / 12R
Wheels
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Front Axle and Brakes
Suspended Front Axle Available – No
Service Brake Type – Wet disc
Kubota M6060 Hydraulic System
Hydraulic System Type – np
Main Hydraulic Pump Type – np
Implement Pump Flow, gpm (Lpm) – 11.0 (41.6)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 1 std; 2nd or 3rd opt
3-Point Hitch Features
3-Point Hitch Category – Category 1 / 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position, Draft and Mixed
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,307 (1500)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 4,189 (1900)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar Description – Swinging
Wheelbase
Wheelbase, 2WD, in (mm) – 84.4 (2145)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 83.1 (2110)
Kubota M6060 Dimensions
Length, 2WD, incl. Hitch/Drawbar, in (mm) – 142.7 (3625)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 138 (3505)
Height to Top of Cab, in (mm) – 100.6 (2555)
Height to Top of ROPS raised, in (mm) – 96.9 (2460) –
Overall Width, with standard wheels or tracks, in (mm) – 73 (1860)
minimum
Weight
Weight, 2WD w/ROPS, lb (kg) – No open ROPS on 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 5,005 (2270)
Weight, 2WD w/Cab, lb (kg) – 5,226 (2370)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 5,358 (2430)
Weight, Total allowable, w/maximum ballast, lb (kg) – np
Tires
Front Tire Size, 2WD – 7.5.2016
Front Tire Size orTrack Width, MFD/4WD or Track – 9.5-24 R1
Rear Tire Size or Track Width – 16.9-28 R1