JD E150 Engine Specifications
Engine Model – Briggs and Stratton 44N677
Engine Series – V-Twin
Engine Type – 4-stroke, air cooled, OHV (Overhead Valve)
Bore (mm) – 79.2
Stroke (mm) – 73.4
Oil Capacity (L) – 1.9
Cylinder – Cast Iron Sleeve
Cylinders – Twin
Gross Power HP (kW) @3600 rpm – 25.0
Displacement – 724 cc (44.2 cu. in.)
Spark Plug Gap – 0.76 mm (0.030 in.)
Spark Plug Torque – 20 Nm (15 lb-ft)
Oil Filter – John Deere Easy Change 30-Second Oil Change System
Air Filter – Cartridge
Crankcase, with Easy Change 30-Second Oil Change System – 2.6 L (2.8 qt)
Fuel Tank – 9 L (2.4 gal)
Shaft Size (In.) – 1 x 4-19/64 Inch
Crankshaft Type – Straight
Crankshaft Diameter (In.) – 1 In.
Length (mm) – 479
Height (mm) – 327
Width (mm) – 393
Weight (kg) – 37.6
John Deere E150 Transmission
Transmission Type – Hydrostatic
Transaxle Model – Tuff Torq TL-200
Reduction Ratio – 21.53:1
Axle Torque (Rated) – 177.7 Nm (131 lb-ft)
Max. Tire Diameter – 457 mm (18 in)
Brake Capacity – 253 Nm (187 lb-ft) @350 N (79 lb) Brake arm force
Displacement (Pump/Motor) – 7/10 cc/rev
Max. Input Speed – 3,000 rpm
Axle Shaft Size – 19.05 mm (0.75 in)
Weight (dry) – 12.5 kg (27.6 lb)
Brake Type – Wet Disc, Internal
Housing (Case) – Aluminum Die-Cast
Gears – Heat-treated Powder Metal
Differential – Automotive-type Bevel Gears
Speed Control System – Foot Control and Hand Control
Bypass Valve (Roll Release) – Standard
Hydraulic fluid type – Proprietary Tuff Torq Tuff Tech drive fluid
recommended
Travel Speed (Forward) – 0-8,9 km/h (0-5,5 mph)
Travel Speed (Reverse) – 0-5,2 km/h (0-3,2 mph)
Travel Speed (Forward) – 0-8,9 km/h (0-5,5 mph)
Travel Speed (Reverse) – 0-5,2 km/h (0-3,2 mph)
Mid PTO – Independent
Clutch – Electric
Electrical System
Charging System – Regulated Circuit
Charging System Capacity – 9 Amp
Battery Voltage – 12 Volts
Battery Type – BCI Group U1
JD E150 Tires
Front Tire Size – 15×6.00-6
Rear Tire Size – 20×10.0-8
Front Tire Pressure – 97 kPa (14 psi)
Rear Tire Pressure – 69 kPa (10 psi)
John Deere E150 Dimensions
Height – 1130 mm (45.5 in.)
Length (Overall) – 1770 mm (69.5 in.)
Width (Mower Deck Chute Down) – 1520 mm (60 in.)
Weight – 218 kg (479 lb)
JD E150 Attachments
48 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1220 mm (48 in)
54 Inch Mower Deck
Blades Rotary – 3
Blade Nut Torque (w/5/8 in. Nut) – 88 Nm (65 lb-ft)
Cutting Height (Approximately) – 25-102 mm (1-4 in)
Cutting Width – 1370 mm (54 in)