John Deere 9430 Engine Specifications
Engine Make – John Deere
Engine Model – 6135HRW02
Cylinders – 6
Displacement, cu in (L) – 824 (13.5)
Engine Bore, in (mm) – 5.2 (132)
Engine Stroke, in (mm) – 6.5 (165)
Engine Power, Rated, hp (kW) – 425 (317)
Maximum Engine Power, hp (kW) – 439 (327)
Engine Speed, rpm – 2100
Power Boost, hp (kW) – 14 (10.4)
Fuel Tank, gal (L) – 350 (1325)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Air to air aftercooled
Fuel System Description – Unit Injector System
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – EGR
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Variable Speed Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
Power take off
PTO Horsepower, hp (kW) – 320 (238)
PTO Speeds, rpm – 1000
PTO operational Type – Independent
JD 9430 Transmission
Description – 24 Speed Manual Shift
Transmission Type – Manual Shift
Forward / Reverse Speeds – 24F / 6R
Maximum Speed Forward, mph (kph) – 23.96 (38.5)
Creeper Range – No
Shuttle (Forward-Reverse) – No
JD 9430T Transmission
Description – 18 Speed Automatic PowerShift
Transmission Type – Power Shift
Forward / Reverse Speeds – 18F / 6R
Maximum Speed Forward, mph (kph) – 21.72 (34.98)
Creeper Range – No
Shuttle (Forward-Reverse) – Std
Wheels and Tires
Drive Wheels – 4WD
Tractor Steering Configuration – Frame Articulated
Wheelbase, 4WD, in (mm) – 137.8 (3500)
Front Tire Size, 4WD – 710 / 70R42 Duals
Rear Tire Size – 710 / 70R42 Duals
Drive Wheels (9430T tractor) – 2 Tracks
Tractor Steering Configuration (9430T) – Track-type Steer
Rear Tire Size (9430T tractor) – 30 (762) to 36 (914) Rubber Track
JD 9430 Axles and Brakes
Final Drive – Planetary / Inboard
Axle Output End – Bar
Axle Bar Diameter, in (mm) – 4.3 (110)
Suspended Front Axle – No
Suspended Front Axle (9430T) – AirCushion on front swingarm and walking
beam
Brake Type – Wet disc
John Deere 9430 Hydraulic System
Hydraulic System Type – Closed center, pressure / flow compensated
Main Hydraulic Pump Type – Closed center, pressure / flow compensated
Standard Pump Flow, gpm (Lpm) – 44 (167)
Optional Pump Flow, gpm (Lpm) – 48 (182) or 78 (295)
Standard Remote Valves – 4
3-Point Hitch
3-Point Hitch Category – Category 3 / 4N or 4 N / 4
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic
Draft Link Ends Adjustable – No
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 15,300 (6940)
Drawbar Description – Swinging
JD 9430 Dimensions and Weight
Weight (shipping) – 35,530 lbs (16116 kg)
Weight (operating) – 38,600 lbs (17508 kg) (480/80R46 triples)
Length – 270 inches (685 cm) / 285 inches (723 cm) (with 3-point)
Width – 118.6 inches (301 cm)
Height (hood) – 107 inches (271 cm)
Height (cab) – 142 inches (360 cm)
Height (exhaust) – 156 inches (396 cm)
Hinge pin Ground clearance – 20.5 inches (52 cm)
Clearance (rear axle) – 30.8 inches (78 cm)
Rear axle – 4.331 by 120 inches (110×3048 mm)