JD 8310R Engine Specifications
Engine Make – John Deere
Engine Model – PSX 9.0L
Cylinders – 6
Displacement, cu in (L) – 548 (9.0)
Engine Bore, in (mm) – 4.66 (118.4)
Engine Stroke, in (mm) – 5.35 (136)
Engine Power, Rated, hp (kW) – 310 (228)
Maximum Engine Power, hp (kW) – 341 (251)
Engine Speed, rpm – 2100
Power Boost, hp (kW) – 35 (26)
Fuel Tank, gal (L) – 184 (695)
Block Design, Replaceable Liners – Wet liners, replaceable
Aspiration, Turbocharged or Naturally Aspirated – Two-stage
turbocharged, aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – Standard
Diesel Particulate Filter (DPF) – Standard
Exhaust Pipe – Vertical
Cooling System Fan Drive Type – Variable belt sheave
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200
Power take off
PTO Horsepower, hp (kW) – 261 (195)
PTO Speeds, rpm – 1000 std; 540/1000 opt
PTO operational Type – Independent
John Deere 8310R Transmission
Description – Automatic PowerShift
Transmission Type – Automatic power shift
Forward / Reverse Speeds – 16F/4R
Maximum Speed Forward, mph (kph) – 26 (42)
Creeper Range – No
Shuttle (Forward-Reverse) – Standard
Description – AutoPowr/IVT
Transmission Type – Hydro-mechanical
Forward / Reverse Speeds – Infinite
Description – AutoPowr/IVT 50 km/h (31 mph)
Transmission Type – Hydro-mechanical
Forward / Reverse Speeds – Infinite
JD 8310R Wheels and Tires
Drive Wheels – 4WD
Tractor Steering Configuration – Front Steer
Wheelbase, 2WD, in (mm) – No 2WD
Wheelbase, 4WD, in (mm) – 118.9 (3020)
Front Tire Size, 2WD – No 2WD
Front Tire Size, 4WD – 420/85R34
Rear Tire Size – 480/80R50 Duals
Axles and Brakes
Final Drive – Inboard planetary
Axle Output End – Bar
Axle Bar Diameter, in (mm) – 4.72 (120)
Suspended Front Axle – Independent Link Suspension standard
Brake Type – Inboard wet disc
John Deere 8310R Hydraulic System
Hydraulic System Type – Closed Center, pressure and flow compensated
Main Hydraulic Pump Type – Axial piston
Standard Pump Flow, gpm (Lpm) – 60 (227.1)
Optional Pump Flow, gpm (Lpm) – No option
Standard Remote Valves – 4
3-Point Hitch
3-Point Hitch Category – 4N/3 w/Quik-Coupler
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electrohydraulic
Draft Link Ends Adjustable – No; Quik-Coupler std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 18,700 (8482)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 14,100 (6396)
Drawbar Description – Category 4, Swinging, adjustable
JD 8310R Dimensions and Weight
Weight (operating) – 27,218 lbs (12346 kg) / 30,252 lbs (13722 kg) (ILS)
Weight (max capacity) – 39,683 lbs (18000 kg)
Front axle load – 17,637 lbs (8000 kg)
Rear axle load – 25,353 lbs (11500 kg)
Wheelbase – 118.9 inches (302 cm)
Length – 243.9 inches (619 cm) / 258.3 inches (656 cm) (with front
weights)
Width – 96 inches (243 cm) (axle) / 118.5 inches (300 cm) (long axle)
Height (cab) – 96 inches (243 cm)
Clearance (front axle) – 23.5 inches (59 cm) (1500) / 20.1 inches (51
cm) (ILS)
Clearance (rear axle) – 26.3 inches (66 cm)
Clearance (drawbar) – 13.9 inches (35 cm)