JD 8110 Engine Specifications
Type – Diesel
Cylinders – In-line 6
ECE-R24 at Rated Speed – 143 kW (195 hp)
Rated Speed – 2200 rpm
Aspiration – Turbocharged and Air-to-Air Aftercooled
Lubrication – Full-Flow Filtration with Bypass
Displacement – 8.1 L (496 in3 )
Bore – 116 mm (4.56 in.)
Stroke – 128 mm (5.04 in.)
Intake Valve Clearance – 0.46 mm (0.018 in.)
Exhaust Valve Clearance – 0.71 mm (0.028 in.)
Compression Ratio – 15.8:1
Slow Idle – 800±10 rpm
Fast Idle – 2300±25 rpm
Governed Speed Range – 800-2400 rpm
Operating Speed Range – 1500-2200 rpm
Injection Pump Type – In-Line with Electronic Governor
Fuel Filter – Standard Clamp-On Final Filter with Optional Spin-On
Primary Filter with Water Separator Bowl
Air Cleaner – Dry-Type with Secondary Element
Cooling System Type – 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan – Viscous Drive
Thermostats – Two Heavy-Duty
Electrical System Type – 12 Volt
Alternator – Negative Ground 140 Amp
Batteries – Two 12 Volt
Cold Cranking Amps – 1850
John Deere 8110 Power Take Off
PTO Type – Fully Independent
Standard Size – 45 mm (1-3/4 in.) 1000 rpm
Optional Size – 45 mm (1-3/4 in.) 1000 rpm-35 mm (1-3/8 in.) 1000 rpm-35
mm (1-3/8 in.) 540 rpm Adapter
PTO Operating Speed 1000 rpm – 2200 rpm
PTO Operating Speed 540 rpm – 1975 rpm
PTO (claimed) – 165 hp (123.0 kW)
Transmission
Model – Powershift Transmission
Transmission Type – Electronically Activated, Wet Disk Clutch
Gear Selections – 16 Forward and 4 Reverse
Clutch – Multiple Wet-Disk Hydraulically Activated
JD 8110 Mechanical
Chassis – 4×2 2WD / 4×4 MFWD 4WD (optional)
Steering – Hydrostatic power
Brakes Type – Hydraulically Operated Wet Disk
John Deere 8110 Hydraulics and Hitch
Type – Pressure/Flow Compensated
Tandem Pump (Steering-Brakes-Charge) – Gear Pump
Maximum Pressure – 20 000 kPa (200 bar) (2900 psi)
Rated Flow at Charge Pump – 108 L/min (28 gpm)
Rated Flow at Primary Pump – 78 L/min (21 gpm)
Secondary Pump (Hitch-SCVs) – Axial Piston Pump
Available Flow at SCVs – 132 L/min (33.5 gpm)
Available Flow at SCVs (Optional Pump) – 162 L/min (42.5 gpm)
Selective Control Valves (SCVs) – Electro-hydraulic
3-Point Hitch Lift Capacity per OECD Procedures (610 mm (24 in.) Behind
Hitch Points Through Entire Lift Range) – 49.9 kN (14165 lb)
Rear Hitch Type – 3, 3N
Rear lift – 10,400 lbs (4717 kg) / 14,165 lbs (6425 kg)
JD 8110 Dimensions and Weight
Front Tires – 16.9R30
Rear Tires – 18.4R46
Wheelbase – 2950 mm (116.1 in.)
Overall Length – 5246 mm (206.5 in.)
Width (axle length) – 2438 mm (96 in.)
Axle Diameter – 100 mm (3-15/16 in.)
Height Top of Cab – 3005 mm (118.3 in.)
Crop Clearance (Front Axle-MFWD) – 590 mm (23.2 in.)
Crop Clearance (Rear Axle Housing) – 753 mm (29.6 in.)
Drawbar Clearance – 343 mm (15.5 in.)
Turning Radius – 5.3 m (17.5 ft)
Weight (Average Shipping) – 8125 kg (17876 lb)
Maximum Permissible Front Axle Loads – 6000 kg (13125 lb)
Maximum Permissible Rear Axle Loads – 10 000 kg (22025 lb)
Maximum Permissible Tractor Weight – 14 000 kg (30840 lb)
Maximum Total Weight (Tractor and Trailer) – 40 000 kg (88000 lb)