JD 7410 Engine Specifications
Engine Model – PowerTech 6068
Engine Type – Diesel
Cylinders – In-line 6
Engine Power (Factory Observed) – 78 kW (105 hp)
Rated Speed – 2100 rpm
Aspiration – Turbocharged
Lubrication – Full Pressure-Flow Filtration with Bypass
Displacement – 6.8 L (414 in.3)
Bore – 106.5 mm (4.19 in.)
Stroke – 127 mm (5.00 in.)
Compression Ratio – 17.0:1
Slow Idle Speed – 800-900 rpm
Operating Speed – 1680-2100 rpm
Fuel System Type – Direct Injection
Injection Pump Type – Rotary
Injection Pump Timing – TDC
Air Cleaner – Dry Type Dual Element
Cooling System Type – 69 kPa (0.7 bar) (10 psi) with Centrifugal Pump
Fan – Viscous Drive
Thermostats – Two Heavy-Duty
Electrical System Type – 12 Volt, Negative Ground
Alternator – Open Station 90 amp / Cab 120 amp
Batteries – Two 12 Volt in Parallel
John Deere 7410 Power Take Off
PTO Type – Fully Independent
Speed 540 rpm – 2080 Engine rpm
Speed 1000 rpm – 2093 Engine rpm
PTO Size – 35 mm (1-3/8 in.)
Clutch – Multiple Wet-Disk Hydraulically Operated
Transmission
Standart Transmission – SyncroPlus
Type – Planetary Gears, Mechanically Activated, Wet Disk Clutches and
Brakes
Gear Selections – 12 Forward, 4 Reverse
Shifting – Mechanical, Fully Synchronized Shift On-th-Go and Under Load
in Each Range
Optional Transmission – PowrQuad
Type – Planetary Gears, Hydraulically Activated, Wet Disk Clutches and
Brakes
Gear Selections – 16 or 20 Forward, 16 or 20 Reverse
Shifting – Mechanical-Hydraulic, Full Power Shift On-the-Go, and Under
Load in Each Range
JD 7410 Mechanical
Chassis – 4×2 2WD / 4×4 MFWD 4WD (optional)
Steering – hydrostatic power
Brakes Type – Hydraulically Operated Wet Disk
Cab – ComfortGard cab standard
Hydraulics and Hitch
Type – Closed-Center, Pressure/Flow Compensated
Pump – 9-Piston, Variable Displacement Axial
Pump Displacement (Standard) – 25 cm3 (1.5 in.3)
Pump Displacement (Optional) – 40 cm3 (2.4 in.3)
Valves – 2 to 4
Pump flow – 26 gpm (98.4 lpm) / 38 gpm (143.8 lpm)
Total flow – 16 gpm (60.6 lpm)
Maximum Pressure – 20 000 kPa (200 bar) (2900 psi)
Steering System – Hydrostatic
Available Flow at One SCV (Standard/Optional) – 1.6 L/s (26 gpm) / 2.4
L/s (38 gpm)
Hitch Type – 2 or 3N/2
Hitch Lift Capacity Two-Wheel Drive – 3360 kg (7400 lb)
Hitch Lift Capacity MFWD – 3809 kg (8390 lb)
John Deere 7410 Capacities
Fuel Tank (Standard/Optional) – 190L (50 gal) / 152L (40 gal)
Cooling System – 19L (20 qt)
Crankcase with Filter – 19L (20 qt)
SyncroPlus Transmission, Differential and Hydraulic System – 57L (15
gal)
SyncroPlus Transmission with MFWD, Differential and Hydraulic System –
64L (17 gal)
PowrQuad Transmission, Differential, and Hydraulics – 57L (15 gal)
PowrQuad Transmission with MFWD, Differential and Hydraulics – 64L (17
gal)
PowrQuad Transmission with Creeper, Differential, and Hydraulics – 61L
(16 gal)
PowrQuad Transmission with MFWD and Creeper, Differential and Hydraulics
– 68L (18 gal)
Mechanical Front Wheel Drive Axle Housing – 14.4L (15.2 qt)
Mechanical Front Wheel Drive Wheel Hubs (Standard) – 1.9L (2 qt)
Mechanical Front Wheel Drive Wheel Hubs (High Crop) – 3.8L (4 qt)
Rear Hi-Crop Axle Housings – 3.8L (4 qt)
JD 7410 Dimensions and Weight
Wheelbase Two-Wheel Drive – 2.85 m (112.1 in.)
Wheelbase MFWD – 2.63 m (103.3 in.)
Length (Less Hitch and Drawbar) – 4.40 m (173.0 in.)
Width (Axle Length) Rack and Pinion – 2.40 m (96.0 in.)
Width (Axle Length) Flanged – 2.00 m (79.0 in.)
Width (Axle Length) Flanged (Hi-Clearance) – 1.94 m (76.5 in.)
Height Top of ComfortGard – 2.83 m (111.6 in.)
Height Top of Steering Wheel (Two-Wheel Drive Open Station) – 2216 m
(87.2 in.)
Turning Radius (2WD/MFWD) – 4.51 m (177.6 in.) / 4.75 m (187.2 in.)
Ground Clearance (2WD/MFWD) – 0.76 m (30.0 in.) / 0.58 m (22.9 in.)
Shipping Weight 2WD with Cab, SyncroPlus, and 18.4-38 Rear and 11.00-16
Front Tires – 5212 kg (11491 lb)
Shipping Weight MFWD with Cab, SyncroPlus, and 18.4-38 Rear and 13.6R28
Front Tires – 5599 kg (12343 lb)