John Deere 6210R Engine Specifications
Engine Make – John Deere
Engine Model – PowerTech PSX, 6068 HL497
Number of Cylinders – 6
Advertised Engine Power, Rated, hp (kW) – 210 (154)
Maximum Engine Power, hp (kW) – 231 (170)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 21 (16) bulge; 30 (22) boost
Fuel Tank capacity, gal (L) – 95 (360) Std; 107 (405) Opt
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Displacement, cu in (L) – 414 (6.8)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – Series turbochargers,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber – Direct
Emission Level, US EPA Tier – Tier 4 Interim
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120, 150 or 200
JD 6210R Basic Transmission
Manufacturer’s Description – 20 Speed AutoQuad Plus ECO
Transmission Type – Automatic shift in each range
Number of Forward / Reverse Speeds – 20F / 20R
Maximum Speed Forward, mph (kph) – 25 (40) std; 31 (50) available
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Left hand lever std
Optional Transmission
Manufacturer’s Description – DirectDrive ECO 24F/24R (25 mph/40 kph)
Transmission Type – 3 ranges, 8 gears in each, automatic or manual
Number of Forward / Reverse Speeds – 24F / 24R
Manufacturer’s Description – AutoPowr (IVT) 25 or 31 mph (40 or 50 kph)
Transmission Type – Infinitely Variable
Number of Forward / Reverse Speeds – Infinite
John Deere 6210R Tractor Power Take Off (PTO)
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 175 (131)
PTO Speeds, rpm – 540 / 1000 std; 540E or 1000E opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Wheel Configuration
Drive Wheels – 4WD
Steering Configuration – Front Steer
Rear Axle Assembly
Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Bar
Axle Bar Diameter, in (mm) – 3.94 (100)
Front Axle
Suspended Front Axle Available – Triple-Link Suspension optional
Brakes
Service Brake Type – Wet disc
John Deere 6210R Hydraulic System
Hydraulic System Type – Closed-center, Pressure-Flow Compensated (PFC)
Main Hydraulic Pump Type – Axial piston
Implement Pump Flow, gpm (Lpm) – 41 (155)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 3 std; 4 opt.
JD 6210R Tractor 3-Point Hitch Features
3-Point Hitch Category – Category 3 / 3N
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 11,993 (5440)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 21,050 (9550)
Optional Lift Capacity at lift pin, lb (kg) – No option
Drawbar
Drawbar Description – Category 3, Swinging, adjustable
Wheelbase
Wheelbase, MFD/4WD, in (mm) – 110.2 (2800)
JD 6210R Dimensions
Length, MFD/4WD, incl. Hitch/Drawbar, in (mm) – 199 (5045)
Height to Top of Cab, in (mm) – 124 (3157)
Overall Width, with standard wheels, in (mm) – 100.4 (2550) bar axle
ends
Weight (w/Tires)
Weight, MFD/4WD w/Cab, without ballast, lb (kg) – 17,200 (7802)
Weight, Total allowable, w/maximum ballast, lb (kg) – 28,660 (13000)
Tire Size
Front Tire Size Width, MFD/4WD – 420/90 R30, R1
Rear Tire Size Width – 480/80 R46, R1 Single