JD 6200 Engine Technical Data
Engine Model – John Deere 4039D
Engine Type – 4-cylinder liquid cooled diesel
Number of Cylinders – Four
Displacement, cu in (L) – 239 (3,9)
Engine Bore, in (mm) – 4,19 (106,0)
Engine Stroke, in (mm) – 4,33 (110,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 80, 0 (60,0)
Maximum Engine Power, hp (kW) – 89,0 (66,4)
Rated Engine Speed, rpm – 2300
Fast Idle Speed, rpm – 2700
Slow Idle Speed, rpm – 800-850
Compression – 17.8:1
Injection Nozzles, in (mm) – 0,377 (9,5)
Fuel Tank Capacity (ROPS), gal (L) – 29,0 (110,0)
Fuel Tank Capacity (Cabin), gal (L) – 42,0 (159,0)
Oil Capacity, qts (L) – 12,8 (12,1)
Coolant Capacity (ROPS), qts (L) – 14,5 (13,7)
Coolant Capacity (Cabin), qts (L) – 18,5 (17,5)
Electrical System Rating, Volts – 12
Power Take-Off
Rear PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 68,3 (50,9)
Rear PTO Speeds, rpm – 540/1000
John Deere 6200 Transmission
Transmission Model (Std) – SyncroPlus 12F/4R (with creeper 21F/7R)
Transmission Type – Fully synchronized/Partially synchronized
Number of Forward Speeds – 12 (21)
Number of Reverse Speeds – 4 (7)
Clutch – Triple wet disc PermaClutch
Clutch Disc Diameter, in (mm) – 9,0 (227)
Transmission Model (Opt) – PowrQuad 16F/16R (with creeper 28F/28R)
Transmission Type – Partial power shift
Number of Forward Speeds – 16 (28)
Number of Reverse Speeds – 16 (28)
JD 6200 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front steer
Steering System – Hydrostatic power
Front Tire Size (2WD) – 7.50-18
Front Tire Size (4WD) – 12.4-24
Rear Tire Size – 18.4-30
Axles and Brakes
Differential – Standard
Service Brake – Differential hydraulic wet disc
John Deere 6200 Hydraulic System
Hydraulic System Type – Closed-center pressure flow compensated (PFC)
Implement Pump Flow, gpm (Lpm) – 18,0 (68,1) / 25,0 (94,6) optional
Hydraulic Capacity, gal (L) – 12,4 (46,9)
Hydraulic Pressure, Bar (psi) – 200,0 (2900)
Number of Standard Remote Valves – 1 to 4
3-Point Hitch
3-Point Hitch Type – Rear
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Lower link
Standard Lift Capacity 24-in (600mm) behind pin, lb (kg) – 4745 (2155)
Standard Lift Capacity at lift pin, lb (kg) – 5020 (2278)
JD 6200 Dimensions and Weight
Wheelbase, in (mm) – 94,6 (2400)
Length, in (mm) – 165,0 (4190)
Height (ROPS), in (mm) – 100,0 (2540)
Height (Cabin), in (mm) – 102,1 (2590)
Overall Width, in (mm) – 85,7 (2170)
Ground Clearance (2WD), in (mm) – 22,8 (570)
Ground Clearance (4WD), in (mm) – 18,0 (450)
Shipping Weight (ROPS 2WD), lb (kg) – 7425 (3367)
Shipping Weight (ROPS 4WD), lb (kg) – 7920 (3595)
Shipping Weight (Cabin 2WD), lb (kg) – 7930 (3600)
Shipping Weight (Cabin 4WD), lb (kg) – 8425 (3820)
Operating Weight (Cabin 4WD), lb (kg) – 9015 (4090)
John Deere 6200 Loader Attachments
640 SL Loader
Loader Model – John Deere 640 SL
Height (to pin), in (mm) – 139 (3530)
Clearance, dumped bucket, in (mm) – 109 (2760)
Dump reach, in (mm) – 43 (1090)
Rollback angle, deg – 40
Breakout force (lift), lb (kg) – 5204 (2360)
Lift to full height (at pin), lb (kg) – 3243 (1471)
Bucket width, in (mm) – 61 (1540)
640 NSL Loader
Loader Model – John Deere 640 NSL
Height (to pin), in (mm) – 139 (3530)
Clearance, dumped bucket, in (mm) – 113 (2870)
Dump reach, in (mm) – 40.7 (1030)
Rollback angle, deg – 15
Breakout force (lift), lb (kg) – 4575 (2075)
Lift to full height (at pin), lb (kg) – 2970 (1347)
Bucket width, in (mm) – 61 (1540)