JD 6155RH Engine Specifications
Engine Make – John Deere
Engine Model – PowerTech PVX, 6068HL498
Number of Cylinders – 6
Displacement, cu in (L) – 414 (6.8)
Engine Bore, in (mm) – 4.19 (106.5)
Engine Stroke, in (mm) – 5.0 (127)
Advertised Engine Power, Rated, hp (kW) – 155 (114)
Maximum Engine Power, hp (kW) – 195 (143)
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – 40 (29)
Fuel Tank capacity, gal (L) – 76.6 (290)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 4.2 (16)
Block Design, Replaceable Liners – Wet liners
Aspiration, Turbocharged or Naturally Aspirated – VGT Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – Ammonia Oxidation Catalyst
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Viscous
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 200 std; 240 opt.
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 121 (90)
PTO Speeds, rpm – 540/1000 std; 540/540E/1000 opt.
PTO operational Type (Independent; Live; Continuous) – Independent
John Deere 6155RH Transmission
Manufacturer’s Description – 16F/16R PowrQuad Plus
Transmission Type – Partially synchronized
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 19 (30)
Creeper Range Available – Optional
Shuttle (Forward-Reverse) Available – Left hand lever std
JD 6155RH High-Crop Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 108.9 (2765)
Front Tire Size orTrack Width, MFD/4WD or Track – 320/90 R46, R2
Rear Tire Size or Track Width – 18.4 R38, R2
John Deere 6155RH High-Crop Axles and Brakes
Final Drive Location and Description – Outboard drop-center gearbox
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disk
JD 6155RH Hydraulics and Hitch
Hydraulic System Type – Closed-center, Pressure-Flow Compensated (PFC)
Main Hydraulic Pump Type – Axial piston
Implement Pump Flow, gpm (Lpm) – 30 (114)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 3 std; 4 opt.
3-Point Hitch Category – Category 3 / 3N
Optional Hitch Category – No option
Draft Sensing or Lift Control – Electronic lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 9,193 (4170)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 10,516 (4770)
Drawbar Description – Category 2, Swinging, adjustable
Dimensions and Weights
Height to Top of Cab, in (mm) – 124 (3150)
Height to Top of ROPS raised, in (mm) – No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) – No open ROPS
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 15,460
(7012)