John Deere 5310 Specs

JD 5310 Engine Specifications

Engine Model – 3029T, Turbocharged
Factory Observed PTO Power – 41 kW (55 hp) at 2400 rpm
Maximum Engine Torque – 195 Nm at 1400 rpm
Cylinders Quantity – 3
Bore – 106.5 mm (4.19 in.)
Stroke – 110 mm (4.33 in.)
Displacement – 2.9 L (179 cu. in.)
Compression Ratio – 17.8:1
Cylinder Firing Order – 1-2-3
Intake Valve Clearance – 0.35 mm (0.014 in.)
Exhaust Valve Clearance – 0.45 mm (0.018 in.)
Slow Idle Speed – 825-875 rpm
Fast Idle Speed – 2550-2600 rpm
Operating Range Speed – 1600-2400 rpm
Injection Pump Timing Position – 7° BTDC (TimeTrac)
Electrical System – 12-Volt, Negative Ground
Battery Voltage – 12-volt
Cold Cranking Amps – 700 CCA
Open Station BCI Group Size – 28 H
Cab BCI Group Size – 31
Alternator – 40 amps

John Deere 5310 Transmission

Standard Transmission – 9/3 CollarShift Transmission
Optional Transmission – 9/3 SyncShuttle with shiftable 540/540E PTO
Lever Gear Selector – Manual Shift
Type – partially synchronized
Gears – 9 forward and 3 reverse
Clutch – dry disc

Power Take-Off

PTO Type – Standard Fully Independent PTO (540)
Operational SyncShuttle Shiftable – 540/540E Independent
Lever Operated Clutch
Engine-540E (SyncShuttle) Speed – 1700 rpm
Engine-540 Speed – 2400 rpm
Power Take-Off Size – 280 mm (11 in.)

JD 5310 Mechanical

Chassis – 4×2 2WD / 4×4 MFWD 4WD (optional)
Steering – power
Brakes – Hydraulically Operated, Wet Disk, Self-Adjusting

Hydraulic System

Type – Open Center Type
Pump Type – Tandem Gear Pump
Steering – Hydrostatic Power Steering
Pump Displacement-Steering – 11.9 cu cm (0.73 cu in.)
Pump Displacement-Implement – 20 cu cm (1.22 cu in.)
Steering Flow Rate – 25.7 L/min. (6.8 gpm)
Implement Flow Rate – 43.2 L/min. (11.4 gpm)
Steering (Maximum) Pressure – 12 997-13 500 kPa (130-135 bar) (1885-1955
psi)
Implement (Maximum) Pressure – 18 995-19 692 kPa (190-197 bar)
(2755-2855 psi)
Hitch Lift Capacity – 1530 kg (3374 lb)
SCV Flow Rate – 43.2 L/min (11.4 gpm)

John Deere 5310 Hitch

Type – Categories I and II, Top Link Sensing
Standard – Fixed Draft Links with Interchangeable Balls
Optional – Telescopic Draft Links with Interchangeable Balls
Three-Point Hitch Lift Capacity at 610 mm (24 in.) Behind Hitch Balls –
1530 kg (3374 lb)

Capacities

Fuel Tank (Open Station/Cab) – 68 L (18 gal) / 87 L (23 gal)
Cooling System – 9.5 L (10 qt)
Crankcase (including filter change) – 8.5 L (9 gal)
Dry Clutch (CollarShift and SyncShuttle Transmission) – 38 L (10 gal)
Wet Clutch (PowrReverser Transmission) – 43.5 L (11.5 gal)
Mechanical Front Wheel Drive (MFWD) Wheel Hubs – 0.6 L (0.6 qt)
MFWD Axle Housing – 5 L (5.2 qt)
MFWD Assembly – 6.2 L (5.7 qt)

JD 5310 Tires

Front Tires – 27/9.5L-15 6PR
Front Tires – 11L-15 8PR
Front Tires – 9.5L-16 6PR
Rear Tires – 14.9-28 6PR
Rear Tires – 16.9-24 6PR

John Deere 5310 Dimensions

Overall Width (with Roll-Gard ROPS/Cab) – 1694 mm (66.7 in.)
Overall Length (less Hitch, Drawbar and Front Weights) – 3274 mm (128.1
in.)
Overall Height from Ground-to-Top of Hood – 1481 mm (58.3 in.)
Overall Height from Ground-to-Top of Steering Wheel – 1618 mm (63.7 in.)
Overall Height from Ground-to-Top of Roll-Gard ROPS – 2253 mm (88.7 in.)
Overall Height from Ground-to-Top of Folded ROPS – 1918 mm (75.5 in.)
Overall Height from Ground-to-Top of Cab – 2487 mm (97.9 in.)
Overall Height from Ground-to-Top of Drawbar – 414 mm (16.3 in.)
Overall Height from Ground-to-Crop Clearance-Front Axle – 376 mm (14.8
in.)
Centerline of Rear Axle to Folded ROPS – 1285 mm (50.6 in.)
Centerline of Rear Axle to Cab – 1854 mm (73 in.)
Wheelbase – 2050 mm (80.7 in.)
Rear Axle Diameter – 76.2 mm (3 in.)
Turning Radius with Brakes – 3.02 m (9.9 ft)
Turning Radius without Brakes – 3.44 m (11.3 ft)
Average Shipping Weight – 2155 kg (4750 lb)

John Deere 541 Self-Leveling Loader

Height (to pin) – 130 inches (330 cm)
Clearance, dumped bucket – 100.6 inches (255 cm)
Dump reach – 33 inches (83 cm)
Dump angle – 86
Clearance, level bucket – 122.6 inches (311 cm)
Reach at ground – 83 inches (210 cm)
Breakout force (at pin) – 4125 lbs (1871 kg)
Lift to full height (at pin) – 2800 lbs (1270 kg)

John Deere 49 Backhoe

Weight – 1533 lbs (695 kg)
Transport height – 94 inches (238 cm)
2-Foot flat digging depth – 115 inches (292 cm)
Reach from pivot – 149 inches (378 cm)
Loading height – 92 inches (233 cm)
Bucket Rotation – 180
Swing Arc – 180
Bucket force – 4575 lbs (2075 kg)
Dipperstick force – 3175 lbs (1440 kg)

Leave a Comment