Farmall 80N Engine Specifications
Advertised Engine Power, Rated, hp (kW) – 74 (55)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 19 (72)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Engine Make – Case IH FPT
Engine Model – 3.4 L
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 120
Case IH Farmall 80N Power Take-Off
PTO Horsepower, Standart / Optional Transmission, hp (kW) – 65 (48.5)
PTO Speeds, rpm – 540/540E std.; 540/1000 opt.
PTO operational Type (Independent; Live; Continuous) – Independent
Standart Transmission
Manufacturer’s Description – 16×16 Mechanical Synchro Shuttle
Transmission Type – 4 synchronized speeds in 4 non-synchro ranges
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 19 or 25 (30 or 40)
Creeper Range Available – 28×16 option
Shuttle (Forward-Reverse) Available – Yes, mechanical shuttle
Optional Transmission
Manufacturer’s Description – 16 x16 Power Shuttle
Transmission Type – 4 synchronized speeds in 4 non-synchro ranges
Number of Forward / Reverse Speeds – 16F / 16R
Manufacturer’s Description – 32 x 16 Dual Command
Transmission Type – Power shuttle w/ Hi/Lo
Number of Forward / Reverse Speeds – 32F / 16R
Farmall 80N Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Front Tire Size, 2WD – 6.00-16, 8 PR F2
Front Tire Size orTrack Width, MFD/4WD or Track – 7.50 R18, R1
Rear Tire Size or Track Width – 14.9 R28; 380/85 R28, R1
Wheelbase, 2WD, in (mm) – 96 (2438)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 96 (2438)
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disc
Case IH Farmall 80N Hydraulics and Hitch
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear, dual-pump
Implement Pump Flow, gpm (Lpm) – 16.9 (64)
Optional Pump Flow, gpm (Lpm) – 21.1 (80) cab only
Number of Standard Remote Valves – 2 or 3 rear; 2 mid
3-Point Hitch Category – Category 1 and 2
Optional Hitch Category – No option
Draft Sensing or Lift Control – Mechanical or electronic draft control
Draft Link Ends Telescopic – Telescopic or claw style
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,780 (1715)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 5,732 (2600)
Drawbar Description – Swinging
Farmall 80N Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 148.8 (3779)
w/ROPS; 159 (4035) w/cab
Height to Top of Cab, in (mm) – 91.7 (2329)
Height to Top of ROPS raised, in (mm) – 90 (2287)
Overall Width, with standard wheels or tracks, in (mm) – 52.9 to 53.4
(1342 to 1356)
Weight, 2WD w/ROPS, lb (kg) – 5,300 (2404)
Weight, MFD/4WD w/ROPS, lb (kg) – 6,243 (2832)
Weight, 2WD w/Cab, lb (kg) – 5,613 (2546)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,094 (2764)
Weight, Total allowable, w/maximum ballast, lb (kg) – 6,812 (3090)