John Deere 5100R Tractor Specification

Engine Performance

Advertised Engine Power, Rated, hp (kW) – 100 (74)
Rated Engine Speed, rpm – 2300
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 19.3 (73) std; 7.5 (28) auxiliary opt.
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF

John Deere 5100 R Tractor PTO Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW) – np
PTO Speeds, rpm – 540 / 540E
PTO operational Type (Independent; Live; Continuous) – Independent

John Deere 5100R Basic Engine Specs

Engine Make – FPT
Engine Model – F5 Series
Number of Cylinders – 4
Displacement, cu in (L) – 207 (3.4)
Engine Bore, in (mm) – 3.90 (99)
Engine Stroke, in (mm) – 4.33 (110)
Block Design, Replaceable Liners – Parent bore block
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,

Fuel System

Fuel System Description – Bosch, 1600 bar
Fuel System Control, Electronic or Mechanical – Mechanical
Fuel Injection to combustion chamber, Direct or Indirect Direct

Emission and Exhaust Treatment

Emission Level, US EPA Tier – Tier 4 Final
Exhaust Gas Recirculation (EGR) – Cooled EGR
Diesel Particulate Filter (DPF) – Passive, automatic
Exhaust Pipe, Vertical stack or Horizontal – Horizontal or vertical

Cooling System

Fan Drive Type – Viscous

Electrical System

System Rating, Volts – 12
Alternator Rating, Amps – 120

John Deere 5100R Basic Transmission

Manufacturer’s Description – 12F/12R SynchReverser
Transmission Type – 3 ranges, 4 speeds
Number of Forward / Reverse Speeds – 12F / 12R
Maximum Speed Forward, mph (kph) – 18.6 (30)
Creeper Range Available – See 24F/12R option
Shuttle (Forward-Reverse) Available – Synchronized reverser

JD 5100R Tractor Optional Transmission

Manufacturer’s Description – 24F/12R PowrReverser
Transmission Type – Hi-Lo and power reverser
Number of Forward / Reverse Speeds – 24F / 12R

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer

Rear Axle Assembly

Final Drive Location and Description – Inboard planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle

John Deere 5100 Tractor Front Axle

Suspended Front Axle Available – No


Service Brake Type – Wet disk

John Deere 5100R Hydraulic System

Hydraulic System Type – Open center
Main Hydraulic Pump Type – Two standard; third optional
Implement Pump Flow, gpm (Lpm) – 17.6 (66.6)
Optional Pump Flow, gpm (Lpm) – 7.9 (29.9) third pump
Number of Standard Remote Valves – 2, 3 or 4

JD 5100R 3-Point Hitch Features

3-Point Hitch Category – Category 2
Optional Hitch Category – Category 1 or 1N
Draft Sensing or Lift Control – Center link draft sensing
Draft Link Ends Telescopic – Optional

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,923 (1780)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – np
Standard Lift Capacity at lift pin, lb (kg) – 5,710 (2590)
Optional Lift Capacity at lift pin, lb (kg) – 6,834 (3100)


Drawbar Description – Swinging
The drawbar is used to pull drawn equipment of all types, particularly
PTO-driven implements.
The drawbar hitch point is located so as to increase the rear axle load
and at the same time slightly reduce load on the front axle.
Besides having a variable swinging range, the drawbar can also be
adjusted lengthwise.

Wheelbase / Trackbase

Wheelbase, 2WD, in (mm) – 82.6 (2098)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 82.6 (2098)


Length, 2WD, incl. Hitch/Drawbar, in (mm) – 170 (4319)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 170 (4319)

JD 5100 Tractor Vertical Dimensions

Height to Top of Cab, in (mm) – 93.3 (2371)
Height to Top of ROPS raised, in (mm) – 98 (2490)

Width w/Tires or Tracks

Overall Width, with standard wheels or tracks, in (mm) – 49.5 (1257)

Weight (w/Tires or Tracks)

Weight, 2WD w/ROPS, lb (kg) – 5,566 (2525)
Weight, MFD/4WD w/ROPS, lb (kg) – 5,864 (2660)
Weight, 2WD w/Cab, lb (kg) – 6,272 (2845)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 6,558 (2975)
Weight, Total allowable, w/maximum ballast, lb (kg) – 7,882 (3575)

Tire / Track Size

Rear Tire Size or Track Width – 280/85R28 up to 480/65R28

Multi-Function Lever (Mechanical)

Multi-function lever permits two SCVs to be operated at the same time.

Buttons allow additional functions to be performed.
If upshift/downshift buttons are equipped, they allow the gears at the
transmission to be shifted.
The slide control can be used to lock the lever.
Pulling lever back raises the front loader.

Pushing the lever forward
until resistance is reached lowers the front loader.
If the lever is pushed forward beyond the resistance, it engages in a
detent and the front loader is in its float position.
Moving the lever to the left makes the loader bucket tip up.

Moving the lever to the right makes the loader bucket dump.

Leave a Comment