John Deere 5100ML Engine Specifications
Engine Model – John Deere PowerTech PWS 4045
Number of Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Advertised Engine Power, Rated, hp (kW) – 100 (75)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 29.6 (112) w/PowrReverser; 38 (144)
w/PowrQuad
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 3.2 (12)
Block Design, Replaceable Liners – Wet replaceable
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – Ammonia Oxidation Catalyst
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal muffler, side
exhaust
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 90 std; 120 opt
Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 85 (63)
PTO Speeds, rpm – 540/540E std.; 540/540E/1000 opt.
PTO operational Type (Independent; Live; Continuous) – Independent
JD 5100ML Transmission
Manufacturer’s Description – 16F/16R PowrReverser
Transmission Type – Partially synchronized
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 17.3 (27.9)
Creeper Range Available – See Creeper option
Shuttle (Forward-Reverse) Available – Standard
Manufacturer’s Description – 16F/16R PowrQuad or 32F/16R PowrQuad
Transmission Type – 32F version has Hi/Lo
Number of Forward / Reverse Speeds – 16F/16R or 32F/16R
Manufacturer’s Description – 16F/16R PowrQuad with Creeper
Transmission Type – Additional 8F / 8R creeper speeds
Number of Forward / Reverse Speeds – 16F+8F creeper / 16R+8R creeper
Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 92.5 (2350)
Front Tire Size orTrack Width, MFD/4WD or Track – 12.5/80-18, 12PR I3
Rear Tire Size or Track Width – 19.5L-24, 10PR R4
John Deere 5100ML Axles and Brakes
Final Drive Location and Description – Inboard Planetary
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disk
JD 5100ML Hydraulic System and Hitch
Hydraulic System Type – Open center std.; PFC opt.
Main Hydraulic Pump Type – Tandem gear std; axial piston opt.
Implement Pump Flow, gpm (Lpm) – 18.4 (69.6)
Optional Pump Flow, gpm (Lpm) – 30.9 (117)
Number of Standard Remote Valves – 3
3-Point Hitch Category – Category 2
Optional Hitch Category – Category 3
Draft Sensing or Lift Control – Draft sensing, lower link
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,900 (2223) 65
mm cylinders
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 6,975 (3164) 75
mm cylinders
Standard Lift Capacity at lift pin, lb (kg) – 5,304 (2406)
Optional Lift Capacity at lift pin, lb (kg) – 7,158 (3247)
Drawbar Description – Extendable
John Deere 5100ML Dimensions and Weight
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 157.3 (3996)
Height to Top of Cab, in (mm) – No cab
Height to Top of ROPS raised, in (mm) – 96.8 (2458)
Overall Width, with standard wheels or tracks, in (mm) – 84 (2134)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 8,298 (3764) w/PowrReverser; 8,740
(3964) w/PowrQuad
Weight, Total allowable, w/maximum ballast, lb (kg) – 16,535 (7500)