JD 5100MH Engine Specifications
Engine Make – John Deere
Engine Model – PowerTech 4045 PWL
Number of Cylinders – 4
Displacement, cu in (L) – 276 (4.5)
Engine Bore, in (mm) – 4.17 (106)
Engine Stroke, in (mm) – 5.0 (127)
Advertised Engine Power, Rated, hp (kW) – 100 (75)
Maximum Engine Power, hp (kW) – Same as advertised
Rated Engine Speed, rpm – 2100
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 37 (140)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – 3.1 (12)
Block Design, Replaceable Liners – Wet replaceable
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged,
air-to-air aftercooled
Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – SCR
with DEF
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – Ammonia Oxidation Catalyst
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 90 standard; 120 optional
John Deere 5100MH Power Take-Off
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 85 (63)
PTO Speeds, rpm – 540 / 540E / 1000
PTO operational Type (Independent; Live; Continuous) – Independent
Basic Transmission
Manufacturer’s Description – 12F/4R SyncShuttle Plus w/Creeper
Transmission Type – Partially synchronized
Number of Forward / Reverse Speeds – 12F / 4R + Creeper
Creeper Range Available – Standard
Shuttle (Forward-Reverse) Available – Yes
Optional Transmission
Manufacturer’s Description – 16F/16R PowrReverser w/Creeper
Transmission Type – Electrohydraulic reverser
Number of Forward / Reverse Speeds – 16F / 16R + Creeper
JD 5100MH Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 90.6 (2301)
Front Tire Size orTrack Width, MFD/4WD or Track – 230/95 R40, R1
Rear Tire Size or Track Width – 230/95 R40, R1
John Deere 5100MH Axles and Brakes
Final Drive Location and Description – Outboard drop-center gearbox
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet disk
Hydraulic System and Hitch
Hydraulic System Type – Open center
Main Hydraulic Pump Type – Tandem gear
Implement Pump Flow, gpm (Lpm) – 24.7 (94)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 std; up to 6 total
3-Point Hitch Category – Category 2
Optional Hitch Category – No option
Draft Link Ends Telescopic – Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 4,630 (2100)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 5,935 (2692)
Drawbar Description – Extendable
JD 5100MH Dimensions and Weight
Height to Top of Cab, in (mm) – 110.7 (2812)
Height to Top of ROPS raised, in (mm) – 110 (2796)
Weight, 2WD w/ROPS, lb (kg) – No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) – 8,300 (3760)
Weight, 2WD w/Cab, lb (kg) – No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 9,300 (4220)