Engine Specifications
Engine Model – John Deere 5030
Number of Cylinders – 5
Displacement, cu in (L) – 186 (3.05)
Engine Bore, in (mm) – 3.39 (86)
Engine Stroke, in (mm) – 4.13 (105)
Block Design, Replaceable Liners – Parent bore
Advertised Engine Power, Rated, hp (kW) – 65 (48.4)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2200
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 22.3 (84) OOS / 31.0 (117) Cab
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF
Aspiration, Turbocharged or Naturally Aspirated – Turbocharged
Fuel System Description – Electronic Unit Pump System
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect – Direct
Emission Level, US EPA Tier – Tier 2
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – No
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – No
Diesel Particulate Filter (DPF) – No
Exhaust Pipe, Vertical stack or Horizontal – Vertical stack
Cooling System Fan Drive Type – Belt
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 70 (OOS) / 90 (Cab)
John Deere 5065M PTO
PTO Horsepower, Basic / Optional Transmission, hp (kW) – 50 (37.3)
PTO Speeds, rpm – 540 / 540E
PTO operational Type (Independent; Live; Continuous) – Independent
JD 5065M Basic Transmission
Manufacturer’s Description – 16F / 16R SyncReverser
Transmission Type – Gear
Number of Forward / Reverse Speeds – 16F / 16R
Maximum Speed Forward, mph (kph) – 23.68 (37.9)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes / Clutch Required
Optional Transmissions
Manufacturer’s Description – 12F / 4R SyncShuttle Plus
Transmission Type – Gear
Number of Forward / Reverse Speeds – 12F / 4R
Manufacturer’s Description – 16F / 16R PowrReverser
Transmission Type – Gear
Number of Forward / Reverse Speeds – 16F / 16R
John Deere 5065M Wheels and Tires
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 2WD
/ 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer
Wheelbase, 2WD, in (mm) – 85.63 (2175)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 85.75 (2178)
Front Tire Size, 2WD – 7.50-16 6PR
Front Tire Size orTrack Width, MFD/4WD or Track – 11.2-24 8PR
Rear Tire Size or Track Width – 16.9-30 6PR
Axles and Brakes
Final Drive Location and Description – Planetary / Inboard
Rear Axle Output End, Flange or Bar – Flange
Rear Axle Bar Diameter, in (mm) – No bar axle
Suspended Front Axle Available – No
Service Brake Type – Wet Disk
JD 5065M Hydraulic System
Hydraulic System Type – Open Center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 19.4 (73.6)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 Rear; 2 Mid-mount
3-Point Hitch
3-Point Hitch Category – Category 2 Convertible to 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Lower Link
Draft Link Ends Telescopic – Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) – 3,595 (1631)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – 4,498 (2041)
Standard Lift Capacity at lift pin, lb (kg) – np
Optional Lift Capacity at lift pin, lb (kg) – np
Drawbar Description – Swinging
John Deere 5065M Dimensions and Weight
Length, 2WD, incl. Hitch/Drawbar, in (mm) – np
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – np
Height to Top of Cab, in (mm) – np
Height to Top of ROPS raised, in (mm) – np
Overall Width, with standard wheels or tracks, in (mm) – np
Weight, 2WD w/ROPS, lb (kg) – 6,000 (2721)
Weight, MFD/4WD w/ROPS, lb (kg) – 6,400 (2902)
Weight, 2WD w/Cab, lb (kg) – 7,400 (3357)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – 7,801 (3538)
Weight, Total allowable, w/maximum ballast, lb (kg) – np