John Deere 3036E Engine Specifications
Engine Model – Yanmar 3TNV88- KJPT
Engine Type – 4 cycle, In- line, Water-Cooled Diesel
Combustion Type – Direct Injection
Gross rated Engine power @ rated rpm, hp – 26kW / 34.86 hp@ 2800 rpm
Max PTO Power – 21 kW±5% (28.5 hp±5%)
Max. Engine Torque – 105.5±4%
Cylinders – 3
Bore – 88 mm
Stroke – 90 mm
Displacement – 1.642 L
Compression Ratio – 19:1
Firing Order – 1-3-2
Low Idle – 950±25 rpm
High Idle – 2995 ± 25 rpm
Operating Range – 1700-2800 Engine rpm
Injection Pump Timing – 17.0 ± 1.0° BTDC
Battery – 12V, 52 Ah
Alternator – 12V, 43 Amp
Starter – 12V, 1.2 kW
JD 3036E Transmission
Standard Transmission Type – Sync Reverser
Gears – Constant mesh in speed and range
Clutch type – Single Dry traction Clutch
Forward gears – 8
Reverse gears – 8
Optional Transmission Type – 2 Range Hydrostatic
Forward-Reverse High Speed – 0-22.7 km/h (0-14.1 mph)
Forward-Reverse Low Speed – 0-10.6 km/h (0-6.6 mph)
Power Take-off
Rear PTO – Independent
PTO speed – 540 PTO @ 2500
PTO ERPM – 540E PTO @ 1925 ERPM
Max PTO Power – 21 kW (28.5 hp)
John Deere 3036E Mechanical
Mechanical Front Wheel Drive – Standard
MFWD Capability – All Ranges
MFWD Engagement – On The Go
Steering – Power Steering
Brakes Type – Wet Disc Brakes
Brakes Actuation – Mechanical
Final Drive Type – Spur Gear
Rear Axle Capacity – 1200 kg (2640 lb)
Front Axle Capacity – 800 kg (1760 lb)
JD 3036E Hydraulics and Hitch
PumpType – Tandem Gear
Hydrostatic Pump Type – PV Axial Piston
Implement and Steering Pump Type – Dual Gear
Working Pressure – 17238 kPa (2500 psi)
Charge Pressure – 800 kPa (116 psi)
Loop Pressure – 34.5 MPa (5004 psi)
Implement Pump Flow @ Max Speed – 20.2 L/min (5.3 gpm)
Power Steering Pump Flow @ Max Speed – 15 L/min (4 gpm)
Total Pump Flow – 35.2 L/min (9.3 gpm)
3-Point Hitch Type – Limited Category 1
Lifting capacity Hitch Ball – 910 kg
Lifting capacity 61 cm (24 in.) behind link arms – 615 kg (1356 lb)
Wheels and Tires
Front Treads Width – 1089 mm (42.9 in.)
Rear Treads Width – 1089 mm (42.9 in.)
Front Tires – 8.0×16, 4PR
Front Tires – 25×8.5-14, 6PR R4
Rear Tires – 12.4×24, 4PR
Rear Tires – 12.4×24, 8PR
Rear Tires – 15.00-19.5, 6PR R4
Filling capacities
Fuel tank – 38.5 L
Engine sump – 3.9 L
Transmission/Hydraulics – 33 L
Coolant – 5.3 L
Front Axle – 3.8 L
John Deere 3036E Attachments
305 Loader
Height (to pin) – 2160 mm (85.1 in.)
Dump reach – 620 mm (24.7 in.)
Dump angle – 45 degree
Rollback angle – 30 degree
Breakout force (at pin) – 811 kg (1788 lbs)
Lift to full height (at pin) – 531 kg (1171 lbs)
D160 Loader
Lift capacity at pivot pin (max. height), kg (lb) – 531 (1171)
Maximum lift height at pivot pin, mm (in) – 2162 (85.1)
Reach at max. height, mm (in) – 627 (24.7)
Breakout force at pivot pin, kg (lb) – 811 (1788)
Dump Angle, deg – 45
Rollback Angle, deg – 30
Loader Raising Time, sec – 2.78
Loader Lowering Time, sec – 2.5
Bucket Dump Time, sec (regen) – 1.5
Bucket Rollback Time, sec – 1.55
JD 3036E Dimensions and Weight
Wheel base – 1574 mm
Overall length (Without Front Weight) – 2919 mm
Overall length (With Front weight) – 3280 mm
Overall Width – 1455 mm
Overall height (With Exhaust Pipe) – 2105 mm
Overall height (With ROPS) – 2320 mm
Ground clearance – 290 mm
Turning radius with brake – 2500 mm
Turning radius without brake (Light Duty Front Axle) – 2800 mm
Turning radius without brake (Heavy Duty Front Axle) – 2830 mm
Track Width Front (Light Duty Front Axle) – 1111 mm
Track Width Front (Heavy Duty Front Axle) – 1151 mm
Track Width Rear – 1130 mm
Total weight (Light Duty Front Axle) – 1233 Kg
Total weight (Heavy Duty Front Axle) – 1276 Kg
Maximum vertical load – 400 daN