Engine Specifications
Engine – John Deere diesel
Cylinder – 6
Bore/Stroke – 4,19×4,33 inches (106×110 mm)
Air cleaner – two paper elements
Rated RPM – 2500
Starter volts – 12
Coolant capacity – 20 qts (18,9 L)
liquid-cooled – 359 ci (5,9 L)
Fuel – 32,3 gal (122,3 L)
Ground – negative
Charging system – alternator
Charging amps – 55
John Deere 2950 Transmission
Hi-Lo TSS
Type – partial power shift
Gears – 16 forward and 8 reverse
Speeds – With 18,4-34 rear tires
TSS Creeper
Type – partially synchronized
Gears – 12 forward and 8 reverse
Speeds – With 18,4-34 rear tires
JD 2950 Power Take-off (PTO)
Rear PTO – independent
Rear RPM – 540/1000
PTO power (rated engine speed) – 85,37 hp (63,7 kW)
PTO fuel use (engine speed) – 5,4 gal/hour (20,4 l/hour)
PTO fuel use (PTO speed) – 5,2 gal/hour (19,7 l/hour)
Drawbar power (max) – 72,12 hp (53,8 kW)
Drawbar fuel use (max) – 5,3 gal/hour (20,1 l/hour)
Drawbar pull (max) – 8,768 lbs (3977 kg)
Max pull gear – 3-Low
Mechanical
Chassis – 4×2 2WD / 4×4 MFWD 4WD
Differential lock – rear standard
Steering – power
Brakes – differential hydraulic wet disc
Cab – Two-post ROPS, Canopy available, Sound-Gard cab optional with
available heat and air-conditioning
John Deere 2950 Hydraulics
Type – closed center
Rear valves – 2
Pump flow – 23 gpm (87)
3-Point Hitch
Rear Type – II
Control – load and depth control
Rear lift – 4,868 lbs (2208 kg)
JD 2950 Dimensions and Tires
Ag front – 10,00-16:18,4-34 (2WD) / 13,6-24,8:18,4-34 (4WD)
Weight (operating) – 10,100 lbs (4581 kg) (4WD cab)
Weight (ballasted) – 11,045 lbs (5010 kg)
2WD Wheelbase – 100,4 inches (255 cm)
4WD Wheelbase – 101,6 inches (258 cm)
Length – 153,2 inches (389 cm)
Height (steering wheel) – 73 inches (185 cm)
Height (cab) – 108,3 inches (275 cm)
2WD Clearance (front axle) – 25,9 inches (65 cm)
4WD Clearance (front axle) – 18,9 inches (48 cm)
2WD turn radius – 14,8 feet (4,5 m) / 12,5 feet (3,8 m) (with brakes)
4WD turn radius – 15,7 feet (4,8 m)
JD 2950 Attachments
JD 148 Loader
Loader type – John Deere 148 (For use on tractors with two-wheel drive)
Weight – 1350 lbs (612 kg)
Height (to pin) – 126 inches (320 cm)
Clearance, dumped bucket – 102 inches (259 cm)
Dump reach – 32 inches (81 cm)
Dump angle – 38
Clearance, level bucket – 121 inches (307 cm)
Rollback angle – 11
Breakout force (lift) – 4700 lbs (2131 kg)
Lift to full height (at pin) – 3100 lbs (1406 kg)
Bucket capacity – 0,5 cu yd (0,4 cu m)
Bucket width – 60 inches (152 cm)
JD 260 Loader
Loader type – John Deere 260
Weight – 2178 lbs (987 kg)
Height (to pin) – 154 inches (391 cm)
Clearance, dumped bucket – 126 inches (320 cm)
Dump reach – 40 inches (101 cm)
Dump angle – 46
Clearance, level bucket – 147 inches (373 cm)
Rollback angle – 42
Breakout force (lift) – 4871 lbs (2209 kg)
Lift to full height (at pin) – 3186 lbs (1445 kg)
Bucket width – 61 inches (154 cm)
JD 265 Loader
Loader type – John Deere 265
Weight – 2619 lbs (1187 kg)
Height (to pin) – 157 inches (398 cm)
Clearance, dumped bucket – 123 inches (312 cm)
Dump reach – 25,6 inches (65 cm)
Clearance, level bucket – 150 inches (381 cm)
Rollback angle – 43
Breakout force (lift) – 5730 lbs (2599 kg)
Lift to full height (at pin) – 3920 lbs (1778 kg)
Bucket width – 73 inches (185 cm)