John Deere 2032R Tractor Specs

Engine Performance

Advertised Engine Power, Rated, hp (kW) – 31.7 (23.3)
Maximum Engine Power, hp (kW) – Same as Advertised
Rated Engine Speed, rpm – 2500
Power Boost, hp (kW) – No boost
Fuel Tank capacity, gal (L) – 7.1 (27)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) – No DEF

JD 2032R Tractor PTO Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW) – 23.5 (17.5)
PTO Speeds, rpm – 540
PTO operational Type (Independent; Live; Continuous) – Independent

John Deere 2032R Tractor Basic
Engine Specification

Engine Make – Yanmar
Engine Model – 3TNV88-BNJK
Number of Cylinders – 3
Displacement, cu in (L) – 100.2 (1.642)
Engine Bore, in (mm) – 3.46 (88)
Engine Stroke, in (mm) – 3.54 (90)
Block Design, Replaceable Liners – Cast-in-block
Aspiration, Turbocharged or Naturally Aspirated – Naturally aspirated

Fuel System

Fuel System Description – High Pressure Common Rail
Fuel System Control, Electronic or Mechanical – Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct

Emission and Exhaust Treatment

Emission Level, US EPA Tier – Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) – No
Exhaust Gas Recirculation (EGR) – Cooled EGR
Cleanup Catalyst (CUC) – No
Diesel Oxidation Catalyst (DOC) – DOC standard
Diesel Particulate Filter (DPF) – DPF standard
Exhaust Pipe, Vertical stack or Horizontal – Horizontal

Cooling System

Fan Drive Type – Belt

Electrical System

System Rating, Volts – 12
Alternator Rating, Amps – 40

John Deere 2032R Basic Transmission

Manufacturer’s Description – Hydrostatic, 2 range
Transmission Type – Hydrostatic
Number of Forward / Reverse Speeds – Infinite, 2 ranges
Maximum Speed Forward, mph (kph) – 13.5 (21.8)
Creeper Range Available – No
Shuttle (Forward-Reverse) Available – Yes

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks – 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type
Steer – Front Steer

John Deere 2032 Rear Axle Assembly

Final Drive Location and Description – Spur gear
Axle Output End, Flange or Bar – Flange
Axle Bar Diameter, in (mm) – No bar axle

Front Axle

Suspended Front Axle Available – No


Service Brake Type – Wet Disk

John Deere 2032R Hydraulic System

Hydraulic System Type – Open center
Main Hydraulic Pump Type – Gear
Implement Pump Flow, gpm (Lpm) – 5.0 (18.8)
Optional Pump Flow, gpm (Lpm) – No option
Number of Standard Remote Valves – 2 mid-location

JD 2032R 3-Point Hitch Features

3-Point Hitch Category – Category 1
Optional Hitch Category – No option
Draft Sensing or Lift Control – Position Control
Draft Link Ends Telescopic – No

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) – 1,250 (567)
Optional Lift Capacity 24 Inches behind pin, lb (kg) – No option
Standard Lift Capacity at lift pin, lb (kg) – 1,433 (650)
Optional Lift Capacity at lift pin, lb (kg) – No option


Drawbar Description – Adjustable

Wheelbase / Trackbase

Wheelbase/Trackbase, MFD/4WD or Track, in (mm) – 65.2 (1655)


Length, 2WD, incl. Hitch/Drawbar, in (mm) – No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) – 108.9 (2766)

John Deere 2032 Tractor Vertical

Height to Top of Cab, in (mm) – No Cab
Height to Top of ROPS raised, in (mm) – 89.7 (2279)

Width w/Tires or Tracks

Overall Width, with standard wheels or tracks, in (mm) – 55.6 (1412)

Weight (w/Tires or Tracks)

Weight, MFD/4WD w/ROPS, lb (kg) – 1,973 (895)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) – No Cab
Weight, Total allowable, w/maximum ballast, lb (kg) – np

Tire / Track Size

Front Tire Size orTrack Width, MFD/4WD or Track – 23×8.50-12 6PR R4
Rear Tire Size or Track Width – 14 – 17.5 6PR R4

Leave a Comment