Case MX285 Engine Technical Data
Engine Model – Cummins 6CTA-8.3
Engine Type – 4-stroke, turbocharged intercooled diesel
Number of Cylinders – 6
Displacement, cu in (L) – 505 (8,3)
Engine Bore, in (mm) – 4,49 (114,0)
Engine Stroke, in (mm) – 5,32 (135,0)
Aspiration – Turbocharged
Intercooled – Air cooled
Rated Engine Power, hp (kW) – 287,0 (214,0)
Rated Engine Speed, rpm – 1800
Maximum Torque, Nm (ft-lbs) – 2512 (1853)
Torque Speed, rpm – 1400
Compression – 17.0:1
Emission Level – Tier 2
Fuel Tank Capacity, gal (L) – 160,0 (605,0)
Oil Capacity, qts (L) – 22,0 (20,8)
Coolant Capacity, qts (L) – 24,0 (22,7)
Electrical System Rating, Volts – 12
Charging System – Alternator
Alternator Rating, Amps – 135
Magnum MX 285 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 240,0 (179,0)
PTO Speeds, rpm – 1000
Transmission Configuration
Transmission Type – 18F/4R, Full powershift
Number of Forward Speeds – 18
Number of Reverse Speeds – 4
Clutch Type – Electro-hydrauliclly actuated wet discs
Maximum Forward Speed, mph (kph) – 22,6 (36,4)
Maximum Reverse Speed, mph (kph) – 7,5 (12,1)
Service Brake – Differential hydraulic wet disc
Case IH MX285 Wheels and Tires
Drive Wheels – 4WD 4×4
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 600/70 R30
Rear Tire Size – 710/70 R42
Magnum MX 285 Hydraulic System
Hydraulic System Type – Closed center pressure flow compensated with
parallel priority
Implement Pump Flow (Std), gpm (Lpm) – 38,6 (146,1)
Implement Pump Flow (Opt), gpm (Lpm) – 53,1 (201,0)
Hydraulic Pressure, Bar (psi) – 203 (2950)
Hydraulic Capacity, gal (L) – 45,5 (172,2)
Number of Standard Remote Valves – 3/5
3-Point Hitch
3-Point Hitch Category – 3/3N
Control – Electronic draft control
Standard Lift Capacity at lift pin, lb (kg) – 14970 (6790)
Optional Lift Capacity at lift pin, lb (kg) – 17920 (8130)
Standard Lift Capacity 24-in behind pin, lb (kg) – 7170 (3250)
Case MX285 Dimensions and Weight
Wheelbase, in (mm) – 118,3 (3000)
Length, in (mm) – 235 (5970)
Height, in (mm) – 124,6 (3160)
Turning Radius, in (mm) – 193 (4900)
Weight (Shipping), lb (kg) – 20200 (9160)
Weight (Operating), lb (kg) – 21630 (9810)
Weight (Ballasted), lb (kg) – 31500 (14290)