Case IH Maxxum 5150 Technical Specifications

Case Maxxum 5150 Engine Specs

Engine Model – Cummins 6T-590
Engine Type – 4-stroke, direct injection, turbocharged diesel
Number of Cylinders – 6
Displacement, cu in (L) – 359 (5,88)
Engine Bore, in (mm) – 4,02 (102,0)
Engine Stroke, in (mm) – 4,72 (120,0)
Aspiration – Turbocharged
Rated Engine Power, hp (kW) – 132,0 (98,4)
Rated Engine Speed, rpm – 2200
Maximum Torque, Nm (ft-lbs) – 455 (336)
Torque Speed, rpm – 1200
Idle Speed, rpm – 850-2355
Compression – 17.5:1
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 45,0 (170,0)
Oil Capacity, qts (L) – 15,9 (15,0)
Coolant Capacity, qts (L) – 22,0 (20,8)
Electrical System Rating, Volts – 12
Alternator Rating, Amps – 65

Maxxum 5150 Power Take-Off

PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 112,0 (83,5)
PTO Speeds, rpm – 540/1000
PTO / Engine Speeds, rpm – 540/1880, 1000/2200
PTO Clutch – Hydraulic wet disc

Transmission Configuration

Transmission Type – 16F/12R, 4-Speed power shift
Number of Forward Speeds – 16 (24 with Creeper)
Number of Reverse Speeds – 12 (20 with Creeper)
Maximum Speed (Forward), mph (kph) – 24,9 (40,0)
Maximum Speed (Reverse), mph (kph) – 13,7 (22,0)
Maximum Forward Speed (Creeper), mph (kph) – 1,3 (2,1)
Maximum Reverse Speed (Creeper), mph (kph) – 1,5 (2,5)
Service Brake – Wet disc

Case IH Maxxum 5150 Wheels and Tires

Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 16.9R24
Rear Tire Size – 18.4R38

Maxxum 5150 Hydraulics and Hitch

Hydraulic System Type – Open Center
Implement Pump Flow, gpm (Lpm) – 20,7 (78,3)
Hydraulic Pressure, Bar (psi) – 190 (2755)
Hydraulic Capacity, gal (L) – 20,1 (76,3)
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Electro-hydraulic lower-link draft
sensing
Standard Lift Capacity 24-in behind pin, lb (kg) – 11700 (5340)

Case Maxxum 5150 Dimensions and Weight

Wheelbase, in (mm) – 101,8 (2580)
Length, in (mm) – 175,3 (4450)
Height, in (mm) – 107,6 (2730)
Overall Width, in (mm) – 86,8 (2200)
Ground Clearance, in (mm) – 18,3 (460)
Front Tread, in (mm) – 60-88 (1520-2230)
Rear Tread, in (mm) – 60-100 (1520-2540)
Weight (Shipping), lb (kg) – 11400 (5190)
Weight (Operating), lb (kg) – 12350 (5600)

Leave a Comment