Case IH JX95 Engine Specs
Engine Model – CNH NEF
Engine Type – 4 stroke, direct injection, turbocharged diesel
Number of Cylinders – 4, In-line
Displacement, cu in (L) – 274,0 (4,49)
Engine Bore, in (mm) – 4,09 (104,0)
Engine Stroke, in (mm) – 5,20 (132,0)
Rated Engine Power, hp (kW) – 93,9 (70,0)
Rated Engine Speed, rpm – 2500
Torque Speed, rpm – 1250
Maximum Torque, Nm (ft-lbs) – 390 (288,6)
Torque Rise – 44%
Aspiration – Turbocharged
Fuel System – Direct injection
Fuel Tank Capacity, gal (L) – 23,8 (90,0)
Electrical System Rating, Volts – 12
Case JX 95 Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 80,0 (59,7)
PTO Speeds, rpm – 540/540E, 540/1000
Transmission Configuration
Transmission Type (Std) – 12F/12R, Mechanical shuttle
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Clutch – Dry disc
Maximum Speed (Forward), mph (kph) – 18,5 (29,7)
Maximum Speed (Reverse), mph (kph) – 18,6 (29,9)
Transmission Type (Opt) – 20F/12R Creeper
Number of Forward Speeds – 20
Number of Reverse Speeds – 12
Service Brake – Independent wet disc
Case JX95 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 13.6 R24
Rear Tire Size – 18.4 R34
Case IH JX 95 Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow (Std), gpm (Lpm) – 10,6 (40,1)
Implement Pump Flow (Opt), gpm (Lpm) – 13,6 (51,5)
Number of Standard Remote Valves – 3/4
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Mechanical lower-link draft sensing
Standard Lift Capacity at lift pin, lb (kg) – 7720 (3500)
Case JX95 Dimensions and Weight
Wheelbase (2WD), in (mm) – 94 (2380)
Wheelbase (4WD), in (mm) – 91,8 (2330)
Length (2WD), in (mm) – 162 (4110)
Length (4WD), in (mm) – 159,8 (4050)
Overall Width, in (mm) – 71,2 (1800)
Height, in (mm) – 104 (2650)
Turning Radius, in (mm) – 201 (5100)
Weight (2WD), lb (kg) – 6790 (3080)
Weight (4WD), lb (kg) – 7615 (3460)