Case JX75 Engine Specs
Engine Model – Iveco 8045
Engine Type – 4 stroke, direct injection diesel
Number of Cylinders – 4, In-line
Displacement, cu in (L) – 239,0 (3,9)
Engine Bore, in (mm) – 4,09 (104,0)
Engine Stroke, in (mm) – 4,53 (115,0)
Rated Engine Power, hp (kW) – 72,0 (53,7)
Rated Engine Speed, rpm – 2500
Aspiration – Natural
Compression – 18.0:1
Fuel System – Direct injection
Injection Pump Type – Distributor
Direction of Rotation – Anti-clockwise
Air Cleaner – Paper element
Fuel Tank Capacity, gal (L) – 24,3 (92,0)
Electrical System Rating, Volts – 12
Power Take-Off
PTO Operational Type – Independent
PTO Horsepower, hp (kW) – 62,0 (46,2)
PTO Speeds, rpm – 540/540E, 540/1000
Case JX-75 Transmission
Transmission Type (Std) – 12F/12R, Mechanical shuttle
Number of Forward Speeds – 12
Number of Reverse Speeds – 12
Clutch – Dry disc
Maximum Speed (Forward), mph (kph) – 17,5 (28,2)
Maximum Speed (Reverse), mph (kph) – 17,6 (28,3)
Transmission Type (Opt) – 20F/12R Creeper
Number of Forward Speeds – 20
Number of Reverse Speeds – 12
Service Brake – Independent wet disc
Case IH JX75 Wheels and Tires
Drive Wheels – 2WD/4WD
Steering Configuration – Front Steer
Steering System – Hydrostatic power
Front Tire Size – 280/85R28
Rear Tire Size – 380/85R38
Case IH JX-75 Hydraulics and Hitch
Hydraulic System Type – Open center
Implement Pump Flow, gpm (Lpm) – 13,6 (51,5)
Steering Pump Flow, gpm (Lpm) – 8,1 (30,7)
Total Flow, gpm (Lpm) – 21,7 (82,2)
Number of Standard Remote Valves – 3
3-Point Hitch Category – 2
Draft Sensing or Lift Control – Mechanical lower-link draft sensing
Standard Lift Capacity at lift pin, lb (kg) – 5025 (2280)
Case JX-75 Dimensions and Weight
Wheelbase, in (mm) – 88,5 (2240)
Length, in (mm) – 161,7 (4100)
Height, in (mm) – 100,3 (2540)
Weight (2WD), lb (kg) – 6205 (2815)
Weight (4WD), lb (kg) – 6775 (3070)